Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
I recently bought an old 4/4 Holton BBb with no valves (well, there was a Bundy sousaphone set hideously grafted on).
78DAD531-BD29-410B-A25C-3C7C35515E37.jpeg (30.54 KiB) Viewed 222 times
Being curious as to the similarities between this and the similar York model 33, I pulled mine (1906) out of the case (King valves less hideously grafted on).
Both side by side with bells against the back of the sofa to line them up.
AB80D79B-6ACC-41A0-817F-F59816CEE313.jpeg (26.55 KiB) Viewed 222 times
202B6FE2-D71F-45E4-AA0F-C1522FF3F876.jpeg (28.95 KiB) Viewed 222 times
8CE879E9-228C-4613-94EA-6E794E0D7088.jpeg (29.36 KiB) Viewed 222 times
While quite similar (maybe even the same bugle taper), many of the bends (top bow) and the joints (ferrules) are in different spots to be sure.
Some old Yorks, Martins, and perhaps a King rotary valved CC
I have to believe that those “Phillips” tubas - from a couple of decades ago - were fabricated from recycled Holton molds, rather than “the first tuba ever designed by a computer”.
bloke wrote: ↑Tue Apr 20, 2021 7:42 am
I have to believe that those “Phillips” tubas - from a couple of decades ago - were fabricated from recycled Holton molds, rather than “the first tuba ever designed by a computer”.
I tend to agree. The cost to retool for a new model tuba would have prohibitive, especially in light of the fact they already had tooling in-house that would do the same thing.
