DEG 4 valve cluster for sale, includes slides and the first branch or so.
I bought it off of here for a project, then lucked into a valve set that I didn't need to reconfigure. These are .728 bore and would are pretty much perfect for a project/franken-tuba because you can adjust the ports so easily. I just don't have anything to put them on at the moment and a few other projects coming up first.
$500 and you pay shipping.
Valve cluster for sale
Forum rules
This is for buying or selling your personal equipment, but sponsored selling is allowed as well. We are requiring all ads to have the following information. Price, (even for trades) Brand, Model, and location (for instruments, not accessories) need to be included in the ad, or at least be very clear in link provided. It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay Auctions, but Buy it now listings are fine. Photos are HIGHLY suggested as well. If you see an ad that does not meet these criteria, please report it.
This is for buying or selling your personal equipment, but sponsored selling is allowed as well. We are requiring all ads to have the following information. Price, (even for trades) Brand, Model, and location (for instruments, not accessories) need to be included in the ad, or at least be very clear in link provided. It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay Auctions, but Buy it now listings are fine. Photos are HIGHLY suggested as well. If you see an ad that does not meet these criteria, please report it.
-
Brendan Bohnhorst
- Posts: 29
- Joined: Tue Aug 18, 2020 12:51 pm
- Has thanked: 10 times
- Been thanked: 14 times
-
the elephant
- Posts: 3414
- Joined: Thu Aug 13, 2020 8:39 am
- Location: 404 - Not Found
- Has thanked: 1907 times
- Been thanked: 1351 times
Re: Valve cluster for sale
Hey, Brendan! I am sorry I do not have the money right now as I really need those valves. Oh well, they turn up from time to time, so one day when I have the bucks I will locate a set.
A helpful idea to help you locate a buyer: Post high res photos of the casings, port details (to show how they are easily re-routable) and the surface of each piston.
If you already have photos (or you take some soon) and cannot figure out how to post them, PM me and I will host and post them for you. These deserve a home.
Wade
A helpful idea to help you locate a buyer: Post high res photos of the casings, port details (to show how they are easily re-routable) and the surface of each piston.
If you already have photos (or you take some soon) and cannot figure out how to post them, PM me and I will host and post them for you. These deserve a home.
Wade
- These users thanked the author the elephant for the post:
- Brendan Bohnhorst (Tue Jun 08, 2021 1:18 pm)
-
Brendan Bohnhorst
- Posts: 29
- Joined: Tue Aug 18, 2020 12:51 pm
- Has thanked: 10 times
- Been thanked: 14 times
Re: Valve cluster for sale
Pending
P.S. Thanks for the offer Wade!
P.S. Thanks for the offer Wade!
- These users thanked the author Brendan Bohnhorst for the post:
- the elephant (Tue Jun 08, 2021 1:28 pm)
-
the elephant
- Posts: 3414
- Joined: Thu Aug 13, 2020 8:39 am
- Location: 404 - Not Found
- Has thanked: 1907 times
- Been thanked: 1351 times
-
bloke
- Mid South Music
- Posts: 19369
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3858 times
- Been thanked: 4119 times
Re: Valve cluster for sale
That's a really good bore size.
The porting - within those - is good...very little of the typical convex distortions.
The very last ones (towards the shuttering of Weril) were made were stainless steel, and most were nickel plated.
With the only problem being that they are cut to length...
Here are some .728" bore slide tubes and crooks that might be useful (for whomever ends up with this "valve block".
Notice that the sousaphone features a .728" 'dogleg'...and doglegs solve alignment problems !
https://parts-search.yamaha.co.jp/html/ ... _id=105557
https://parts-search.yamaha.co.jp/html/ ... _id=104522
The porting - within those - is good...very little of the typical convex distortions.
The very last ones (towards the shuttering of Weril) were made were stainless steel, and most were nickel plated.
With the only problem being that they are cut to length...
Here are some .728" bore slide tubes and crooks that might be useful (for whomever ends up with this "valve block".
Notice that the sousaphone features a .728" 'dogleg'...and doglegs solve alignment problems !
https://parts-search.yamaha.co.jp/html/ ... _id=105557
https://parts-search.yamaha.co.jp/html/ ... _id=104522
