I'm trying to decide whether it makes sense to either build or buy or better resting stand for my Martin. I'm considering the K&M "king-size" tuba stand (14945.000.55), but I'm not sure how well it would work. Anyone have any positive experience with a stand for a 6/4? I have a Hercules I have been using, but it's a little small for the horn unless I want to bend out the u-shaped supports (as below) which involves inducing a higher chance of metal fatigue than I'm comfortable with.
Stand for a 6/4?
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
- LargeTuba
- Posts: 777
- Joined: Thu Aug 13, 2020 11:08 am
- Has thanked: 97 times
- Been thanked: 136 times
Re: Stand for a 6/4?
I believe I have that K&M stand. It will fit a 20j, but it takes a lot of force and isn't the most stable thing. It fits and supports my Mienl Weston 25 and Eastman 623 very well.
Pt-6P, Holton 345 CC, 45slp
- gwwilk
- Posts: 119
- Joined: Thu Aug 13, 2020 4:39 pm
- Location: Lincoln, NE
- Has thanked: 47 times
- Been thanked: 11 times
- Contact:
Re: Stand for a 6/4?
I have the K&M king size stand where my Rudolf-Meinl Bayreuth resides. You can see it in my avatar.
That said, I've no real idea how my 6/4 aka 5/4 Bayreuth compares size-wise to your Martin.
That said, I've no real idea how my 6/4 aka 5/4 Bayreuth compares size-wise to your Martin.
Re: Stand for a 6/4?
I’ve got two of the K&M “king-size” stands (14945) (considerably more expensive and larger than the “regular-size” one) for 6/4 tubas. IMHO they are the best storage-resting stands available; very sturdy, and fold up quite compactly.
It easily fits both my Yorks and my Holton, with plenty of room to spare. When I get a chance I’ll make a picture comparing the size of the two models.
It easily fits both my Yorks and my Holton, with plenty of room to spare. When I get a chance I’ll make a picture comparing the size of the two models.
- bloke
- Mid South Music
- Posts: 19326
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3852 times
- Been thanked: 4102 times
Re: Stand for a 6/4?
"Displaying" (really just putting the thing down without having to disassemble it and set it in its cases). When playing I either use my lap or a BBC stand.
- bloke
- Mid South Music
- Posts: 19326
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3852 times
- Been thanked: 4102 times
Re: Stand for a 6/4?
The Wenger things that sit on the floor are safe (as long as the screws are tight) and sometimes go for "cheap".
The wall-mount things (sorta designed for sousaphones, but which WILL fit most any tuba) are occasionally available.
I had a band director grow weary of them, and they GAVE me several of the wall-mounts...and (per typical) replaced them with some inferior stuff.
The wall-mount things (sorta designed for sousaphones, but which WILL fit most any tuba) are occasionally available.
I had a band director grow weary of them, and they GAVE me several of the wall-mounts...and (per typical) replaced them with some inferior stuff.
Re: Stand for a 6/4?
The one on the right is the Kaiser stand, on the left the “normal” one - it is considerably larger, especially the legs. Although the cradle pieces have fabric on them, the newer ones also are coated in rubber like the regular stand.
- These users thanked the author Yorkboy for the post (total 2):
- York-aholic (Tue Jul 27, 2021 9:32 pm) • hrender (Tue Jul 27, 2021 11:29 pm)