I bought a Mahillon top action Bb tuba a while back and just got it back from a major restoration (Thanks Beeman Brass works). Now that it's time to play it, any mouthpiece recommendations out there from other Mahillon owners? I'm going to try some of the mouthpieces I already have but any suggestions would be welcome to save time/effort/$$
Thanks
Mouthpiece recommendations for Mahillon
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Mouthpiece recommendations for Mahillon
Andy Pasternak
Hirsbrunner HB7
Conn Naked Lady 14K
1918 York and Sons 33
Hirsbrunner HB7
Conn Naked Lady 14K
1918 York and Sons 33
-
bloke
- Mid South Music
- Posts: 19369
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3858 times
- Been thanked: 4119 times
Re: Mouthpiece recommendations for Mahillon
I have a four-valve here that is languishing in almost-ready-to-sell condition…
it has never been playable since I acquired it, so I have not been able to test it with mouthpieces… These are, then, ideas:
It’s an unusual instrument with a full 4/4 size body yet only a very slender 5/8-inch bore size.
Considering those factors, I would probably look towards no more than a medium depth cup, and a small throat.
I wish I had the bell and mouthpipe (which are awaiting re-nickel-plating) installed, so I could relay some specific experiences with some specific mouthpieces.
EDIT:
Thinking back, I must have stuck it together at least once for a moment, because I remember that it is sharp-natured. I believe I would seek another remedy (besides a deep-cupped mouthpiece) to address this problem.
(I actually fabricated a completely new mouthpipe, which is longer, but main slide extensions would work just as well.)
it has never been playable since I acquired it, so I have not been able to test it with mouthpieces… These are, then, ideas:
It’s an unusual instrument with a full 4/4 size body yet only a very slender 5/8-inch bore size.
Considering those factors, I would probably look towards no more than a medium depth cup, and a small throat.
I wish I had the bell and mouthpipe (which are awaiting re-nickel-plating) installed, so I could relay some specific experiences with some specific mouthpieces.
EDIT:
Thinking back, I must have stuck it together at least once for a moment, because I remember that it is sharp-natured. I believe I would seek another remedy (besides a deep-cupped mouthpiece) to address this problem.
(I actually fabricated a completely new mouthpipe, which is longer, but main slide extensions would work just as well.)
RenoDoc wrote: ↑Thu Nov 18, 2021 11:23 am I bought a Mahillon top action Bb tuba a while back and just got it back from a major restoration (Thanks Beeman Brass works). Now that it's time to play it, any mouthpiece recommendations out there from other Mahillon owners? I'm going to try some of the mouthpieces I already have but any suggestions would be welcome to save time/effort/$$
Thanks
Re: Mouthpiece recommendations for Mahillon
Thanks! That's a good place to start. Much Appreciated.
Andy Pasternak
Hirsbrunner HB7
Conn Naked Lady 14K
1918 York and Sons 33
Hirsbrunner HB7
Conn Naked Lady 14K
1918 York and Sons 33
-
bloke
- Mid South Music
- Posts: 19369
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3858 times
- Been thanked: 4119 times
Re: Mouthpiece recommendations for Mahillon
You might not care for the exceptionally-wide rim - nor the quite-shallow cup of the Schilke 69C4 (which is a shameless knock-off of the Miraphone C4 / aka: TU-23), but these feature a fairly small throat (ie. sort-of carburetor size vs. displacement thing-ish), and - if the shallow cup is cool with you, the rim could be altered (unless you like wide/rounded rims, and many DO like them).
I'm recommending the Schilke knock-off (if this description seems interesting...??), because (often - new or used) the Schilke thing is cheaper than the Miraphone thing.
Sadly, this is the cheapest Schilke 69C4 currently offered on eBay (unless I missed one...??)
https://www.ebay.com/itm/363626258785
ACTUALLY... (brainstorming...)
These (new/cheap) also feature a small throat...
Formerly, they have been seen on the-bay for under $20 - when sold from China (rather than re-sold from the USA)...but I currently don't see any of these being sold from China, so...
https://www.ebay.com/itm/324047078858
I'm recommending the Schilke knock-off (if this description seems interesting...??), because (often - new or used) the Schilke thing is cheaper than the Miraphone thing.
Sadly, this is the cheapest Schilke 69C4 currently offered on eBay (unless I missed one...??)
https://www.ebay.com/itm/363626258785
ACTUALLY... (brainstorming...)
These (new/cheap) also feature a small throat...
Formerly, they have been seen on the-bay for under $20 - when sold from China (rather than re-sold from the USA)...but I currently don't see any of these being sold from China, so...
https://www.ebay.com/itm/324047078858