Conn 36J 4v front action - ebay
Re: Conn 22J(?) 4v front action - ebay
These look like regular action valves which I believe makes it a 36J.
Really good price even considering the condition, but I'm sure it'll rise considerably in the final seconds as auctions often do.
Really good price even considering the condition, but I'm sure it'll rise considerably in the final seconds as auctions often do.
- These users thanked the author MartinMan for the post:
- Mithosphere (Sun Dec 12, 2021 12:29 pm)
-
the elephant
- Posts: 3414
- Joined: Thu Aug 13, 2020 8:39 am
- Location: 404 - Not Found
- Has thanked: 1907 times
- Been thanked: 1351 times
Re: Conn 22J(?) 4v front action - ebay
The bell has "36J" stamped on the tenon. (To me, it actually looks like "38J" but I'm getting blind in my advancing age, heh, heh…)
The 4th piston appears to be in the casing. It is missing the stem and the button. The large dent in the bottom bow is a job for someone who is skilled in using magnets like the MDRS. It will require balls and magnets large enough to cause a severe injury to the tech if he or she is not very experienced with this method of dent work. The rest of the dent work appears to be pretty easy to get out, magnets or traditional rod-and-ball, either way.
These horns have the old Conn "crysteel" valves, so if the horn looks this decent then the pistons are likely in good shape, plating-wise.
Note that the bottom bow only has a guard wire. I thought these all had guard wires AND caps, so this could have been a restoration with a refinish job, and therefore, could be hiding a lot of horrors, internally.
Bid with caution…
The 4th piston appears to be in the casing. It is missing the stem and the button. The large dent in the bottom bow is a job for someone who is skilled in using magnets like the MDRS. It will require balls and magnets large enough to cause a severe injury to the tech if he or she is not very experienced with this method of dent work. The rest of the dent work appears to be pretty easy to get out, magnets or traditional rod-and-ball, either way.
These horns have the old Conn "crysteel" valves, so if the horn looks this decent then the pistons are likely in good shape, plating-wise.
Note that the bottom bow only has a guard wire. I thought these all had guard wires AND caps, so this could have been a restoration with a refinish job, and therefore, could be hiding a lot of horrors, internally.
Bid with caution…
