Tuba Tuesday - C. G. Conn EEb helicon

Post Reply
User avatar
LeMark
Site Admin
Posts: 2838
Joined: Wed Aug 12, 2020 8:03 am
Location: Arlington TX
Has thanked: 77 times
Been thanked: 820 times

Tuba Tuesday - C. G. Conn EEb helicon

Post by LeMark »

this one actually has a connection to our very own Mark Jones, so I'm going to let him post the rest of the story

Mark? you're up.


Yep, I'm Mark
User avatar
LeMark
Site Admin
Posts: 2838
Joined: Wed Aug 12, 2020 8:03 am
Location: Arlington TX
Has thanked: 77 times
Been thanked: 820 times

Re: Tuba Tuesday - C. G. Conn EEb helicon

Post by LeMark »

OK Mark hasn't seen the PM yet. I'll post it and he can fill in more details
This Tuba Tuesday we feature our newest addition: a very rare C. G. Conn EEb helicon, circa 1884 which has three of the earliest form of the piston valve, known as Stoelzel pistons, after the inventor Heinrich Stoelzel.

Heinrich Stoelzel (b. 1777; d. 1844). was a professional horn player who worked in Leipzig and Berlin, Germany in the late 18th and 19th centuries. In 1814, he created the first successful airtight piston valve which he placed on his own instruments. Circa 1817, he asked the German maker Griessling & Schmitt to make brass instruments with his new airtight piston valves.

Piston valves continued to Improve until 1839 when the French maker Etienne Périnet designed his version of the airtight piston valve, which is basically what is still being used today.

The Stoelzel valve differs from the modern, or Périnet, piston valve in that the air passage enters at the bottom of the piston (shown below on right). This type of valve, however, had inherent problems. It forced the air to double back on itself and the 90 degree turns disrupted the bore, causing significant undesired back-pressure.

C. G. Conn was founded in 1874 by Charles Gerard Conn in Elkhart, Indiana. His use of Stoelzel valves on a small number of his early instruments was probably due to requests from customers who wanted them.

Our C. G. Conn EEb helicon with Stoelzel valves, shown below, is the only instrument in the Collection with Stoelzel valves. It has a bell diameter of 14.5 inches and a valve bore of .570 inch.

I want to thank our good friend and fellow collector, Mark Jones, for helping us acquire this rare instrument.
Attachments
118469482_3234937643242154_2646927605305710165_o.jpg
118469482_3234937643242154_2646927605305710165_o.jpg (54.36 KiB) Viewed 740 times
118542214_3234937626575489_7899298814675298507_o.jpg
118542214_3234937626575489_7899298814675298507_o.jpg (77.01 KiB) Viewed 740 times
Yep, I'm Mark
User avatar
bisontuba
Posts: 938
Joined: Thu Aug 13, 2020 8:08 am
Location: Bottom of Lake Erie
Has thanked: 148 times
Been thanked: 697 times

Re: Tuba Tuesday - C. G. Conn EEb helicon

Post by bisontuba »

:clap:
User avatar
Mithosphere
Posts: 128
Joined: Thu Aug 13, 2020 1:26 pm
Has thanked: 40 times
Been thanked: 13 times

Re: Tuba Tuesday - C. G. Conn EEb helicon

Post by Mithosphere »

I think (but I don't know) there's one of these in the Greenleaf Collection - that valve configuration looks familiar
humBell
Posts: 2050
Joined: Thu Aug 13, 2020 11:25 am
Has thanked: 218 times
Been thanked: 165 times

Re: Tuba Tuesday - C. G. Conn EEb helicon

Post by humBell »

Cool beans!
"All art is one." -Hal
Post Reply