POLL: not for advice, but simply based on curiousity
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
- bloke
- Mid South Music
- Posts: 19396
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3866 times
- Been thanked: 4131 times
POLL: not for advice, but simply based on curiousity
It's extremely common for tubas to offer lower 4th valve tuning for the third partial, as opposed to the second partial.
examples:
B-flat tuba 4th valve: C flatter than low F
C tuba: D flatter than low G
E-flat tuba: F flatter than low B-flat
F tuba: G flatter than low C
The poll (simply) asks how those (whose instruments feature this tendency) deal with it.
examples:
B-flat tuba 4th valve: C flatter than low F
C tuba: D flatter than low G
E-flat tuba: F flatter than low B-flat
F tuba: G flatter than low C
The poll (simply) asks how those (whose instruments feature this tendency) deal with it.
- bloke
- Mid South Music
- Posts: 19396
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3866 times
- Been thanked: 4131 times
Re: POLL: not for advice, but simply based on curiousity
It probably would have no effect, unless you were to hook it up to a blue tooth device.
Otherwise, be sure that - just as with a potato - you put it in your front trousers pocket, and never in your back trousers pocket.
- Three Valves
- Posts: 4615
- Joined: Thu Aug 13, 2020 4:07 pm
- Location: The Land of Pleasant Living
- Has thanked: 820 times
- Been thanked: 506 times
Re: POLL: not for advice, but simply based on curiousity
My wife has a Redskins bobble head wishnick.
I work the tuning slide until it's head stops shaking left to right and begins shaking up and down.
YMMV.
I work the tuning slide until it's head stops shaking left to right and begins shaking up and down.
YMMV.
- These users thanked the author Three Valves for the post (total 2):
- WC8KCY (Wed May 18, 2022 11:44 am) • Nworbekim (Wed May 18, 2022 11:53 am)
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Re: POLL: not for advice, but simply based on curiousity
OK, got it.
I assume the Bluetooth device should incorporate a microphone, amplifier, and loudspeaker...and use digital signal processing to emit sound waves out-of-phase to any detected out-of-tune pitch, thus rendering them inaudible ("active noise cancellation").
I assume the Bluetooth device should incorporate a microphone, amplifier, and loudspeaker...and use digital signal processing to emit sound waves out-of-phase to any detected out-of-tune pitch, thus rendering them inaudible ("active noise cancellation").
- jtm
- Posts: 1110
- Joined: Sat Aug 15, 2020 2:51 pm
- Location: Austin, Texas
- Has thanked: 705 times
- Been thanked: 209 times
Re: POLL: not for advice, but simply based on curiousity
My choice isn't on the list :(
Tune the upper one to be right and easy. The lower one is really close and lips down easily. C# is sharp, of course, but also easy to lip down. Or play C# as 5-1-2, and lip up a little.
To be honest, I'd probably like a left hand 2nd valve slide trigger.
Tune the upper one to be right and easy. The lower one is really close and lips down easily. C# is sharp, of course, but also easy to lip down. Or play C# as 5-1-2, and lip up a little.
To be honest, I'd probably like a left hand 2nd valve slide trigger.
John Morris
This practicing trick actually seems to be working!
playing some old German rotary tubas for free
This practicing trick actually seems to be working!
playing some old German rotary tubas for free
Re: POLL: not for advice, but simply based on curiousity
That's about what I do too. Alternate fingering for 2-4 (on mine, it's 1-2-5) for sustained notes. Whatever for fast runs.jtm wrote: ↑Wed May 18, 2022 1:38 pm My choice isn't on the list :(
Tune the upper one to be right and easy. The lower one is really close and lips down easily. C# is sharp, of course, but also easy to lip down. Or play C# as 5-1-2, and lip up a little.
To be honest, I'd probably like a left hand 2nd valve slide trigger.
Keep the D in tune. Lip the G down. It's easier for me to lip down and keep a good tone than lip up and keep a good tone.
But again, this is all situational. If I had a piece that had 48 G's in a row and a single D somewhere in there, I'd set the slides accordingly.
- Doc
- Posts: 2472
- Joined: Thu Aug 13, 2020 9:48 am
- Location: Downtown Browntown
- Has thanked: 846 times
- Been thanked: 767 times
- Contact:
Re: POLL: not for advice, but simply based on curiousity
496 - I rest my left hand on top of the 4th slide - thumb pulls up, palm pushes in.
186 - I do not move the 4th slide or use alternate fingerings
377 - No slide moving on the Eb comper; F is 4, low Bb is 1&3
Symphonie - G is 1-3, C is 4
186 - I do not move the 4th slide or use alternate fingerings
377 - No slide moving on the Eb comper; F is 4, low Bb is 1&3
Symphonie - G is 1-3, C is 4
Welcome to Browntown!
Home of the Brown Note!
Home of the Brown Note!
Re: POLL: not for advice, but simply based on curiousity
Those seem to be more or less stock on the newer Cerveny horns. Not sure if Lidl will continue that feature.
-
- Posts: 234
- Joined: Thu Aug 13, 2020 5:50 pm
- Location: Indiana
- Has thanked: 0
- Been thanked: 32 times
Re: POLL: not for advice, but simply based on curiousity
If you ignore the fact that the only 4 valve instrument I currently own is a comp euph that I take out of the case a few times a year , I've never really noticed this on tubas. I played a 4/4, 4 valve Rudy Bb when I was in Germany that I played C 13 pull and low F 4. 3rd partial F was 13 and I think I had to play E 123 pull. It actually had a 2nd valve kicker but the valves were tight enough I had to stage it, vented valves would have helped; I didn't have that problem with the 1st valve and played it as a 3 valve horn most of time. I just had a better rhythm with slide pulling that way. If it was my horn I would have looked into a 4th valve extension, either E or Eb, to have a usable low C and B.
Every Bb trombone I've played had that though. I think my Kanstul F contra could play G and C on the same spot though, really messed with muscle memory.
Every Bb trombone I've played had that though. I think my Kanstul F contra could play G and C on the same spot though, really messed with muscle memory.
- GC
- Posts: 516
- Joined: Thu Aug 13, 2020 2:53 pm
- Location: Rome, GA [Rosedale/Armuchee suburbs]
- Has thanked: 77 times
- Been thanked: 101 times
Re: POLL: not for advice, but simply based on curiousity
Bad joke deleted.
Packer/Sterling JP377 compensating Eb; Mercer & Barker MBUZ5 (Tim Buzbee "Lone ☆ Star" F-tuba mouthpiece), Mercer & Barker MB3; for sale: Conn Monster Eb 1914, Fillmore Bros 1/4 Eb ca. 1905 antique (still plays), Bach 42B trombone