Valves guides
Valves guides
hello friends, i have a yamaha yeb321 and my valve guides are worn out. I couldn't find the same valves guides model on the internet. Could you help me?
- Attachments
-
- 20220720_152836 (2).jpg (92.3 KiB) Viewed 336 times
-
bloke
- Mid South Music
- Posts: 19372
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3858 times
- Been thanked: 4119 times
Re: Valves guides
Even the jobbers are out of those, and repair guys are hoarding them - so they will have some for older instruments they might encounter to purchase and resell.
You could 3D print some, or ask a machinist to make some. If you made a bunch, you might be able to sell 'em.
The only other solution (particularly if your pistons are worn - but they're probably fine) is to replace all the pistons, stems, guides, washers with new-style (which will work in the old-style instruments, but ONLY IF you replace EVERYTHING mentioned).
NOTICED:
Someone in the UK seems to be offering - OLD/NEW - a #2, a #3, and a #4 OLD-STYLE pistons WITH those OLD-STYLE guides and screws included...but for (shipped) $100 each !
You could 3D print some, or ask a machinist to make some. If you made a bunch, you might be able to sell 'em.
The only other solution (particularly if your pistons are worn - but they're probably fine) is to replace all the pistons, stems, guides, washers with new-style (which will work in the old-style instruments, but ONLY IF you replace EVERYTHING mentioned).
NOTICED:
Someone in the UK seems to be offering - OLD/NEW - a #2, a #3, and a #4 OLD-STYLE pistons WITH those OLD-STYLE guides and screws included...but for (shipped) $100 each !
-
bloke
- Mid South Music
- Posts: 19372
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3858 times
- Been thanked: 4119 times
Re: Valves guides
One more idea...
You could purchase some nylon and drill/counterbore/cut/carve/file/sand them to fit.
https://www.mcmaster.com/8539K888/
You could purchase some nylon and drill/counterbore/cut/carve/file/sand them to fit.
https://www.mcmaster.com/8539K888/
-
BuddyRogersMusic
- Cincinnati's Largest Showroom of Band Instruments
- Posts: 175
- Joined: Thu Aug 13, 2020 6:36 pm
- Location: Cincinnati, Ohio
- Has thanked: 64 times
- Been thanked: 77 times
- Contact:
-
DonO.
- Posts: 674
- Joined: Sat Sep 18, 2021 11:12 am
- Location: Meadville, PA
- Has thanked: 252 times
- Been thanked: 259 times
Re: Valves guides
I wonder if anyone has ever thought to try 3-D printing those?
Never mind. I see bloke beat me to it.
Never mind. I see bloke beat me to it.
King 2341 “new style”
Kanstul 902-3B
Conn Helleberg Standard 120
Kanstul 902-3B
Conn Helleberg Standard 120
-
bloke
- Mid South Music
- Posts: 19372
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3858 times
- Been thanked: 4119 times
Re: Valves guides
I'm glad Chris has a bunch of them. 
I only have three spares, and (for my repair shop stock, as back-ups for my personally-owned ancient YEP-321, and possible needs for future bought-to-flip instruments) I feel obligated to hold on to them.
I only have three spares, and (for my repair shop stock, as back-ups for my personally-owned ancient YEP-321, and possible needs for future bought-to-flip instruments) I feel obligated to hold on to them.