avoiding confusion

Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Post Reply
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4119 times

avoiding confusion

Post by bloke »

While playing this thing - and trying to remember that E natural is NOT "no valves" but is actually SECOND valve, I began to become concerned about my super-customized Fat Bastard getting mixed up with with all of the other super-customized Fat Bastards out there - such as on a train station platform - when all of the professional full-time B-flat tuba players are headed off to work in the morning, etc...

...so I decided to add some identifying marks to mine, as shown below:

Image


EDIT:

THE RESPONSE OF THE DOUBLE LOW D SHARP HAS BEEN GREATLY IMPROVED BY THIS !!! :bugeyes:
...so all of you other Fat Bastard owners should probably do the same thing...Hey...Wait a minute... :red:
These users thanked the author bloke for the post (total 4):
prairieboy1 (Wed Mar 29, 2023 11:33 am) • Lch3 (Wed Mar 29, 2023 11:42 am) • sweaty (Wed Mar 29, 2023 3:19 pm) • MN_TimTuba (Tue Apr 04, 2023 7:45 pm)


Top
Paulver
Posts: 287
Joined: Sun Aug 23, 2020 6:02 pm
Has thanked: 1 time
Been thanked: 51 times

Re: avoiding confusion

Post by Paulver »

Why would I want to put JS on my tuba when my initials are PB????? :wall: :eyes: :smilie8: :smilie6:
Top
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4119 times

Re: avoiding confusion

Post by bloke »

Paulver wrote: ↑Wed Mar 29, 2023 1:43 pm Why would I want to put JS on my tuba when my initials are PB????? :wall: :eyes: :smilie8: :smilie6:
They nearly look the same turned upside down, so it might offer the same benefit, as far as low range response is concerned, except backwards. :coffee:
Top
User avatar
bort2.0
Posts: 5257
Joined: Thu Aug 13, 2020 9:13 am
Location: Minneapolis
Has thanked: 336 times
Been thanked: 1000 times

Re: avoiding confusion

Post by bort2.0 »

Hey J5... You kind of screwed up the top of your '5"...
Top
User avatar
Three Valves
Posts: 4613
Joined: Thu Aug 13, 2020 4:07 pm
Location: The Land of Pleasant Living
Has thanked: 818 times
Been thanked: 505 times

Re: avoiding confusion

Post by Three Valves »

Hey, I know Jack Shirt! :red:
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Top
tubanh84
Posts: 327
Joined: Thu Aug 13, 2020 8:12 am
Has thanked: 48 times
Been thanked: 126 times

Re: avoiding confusion

Post by tubanh84 »

I am also a fan of Juicy Salsa.
Top
User avatar
Mary Ann
Posts: 3038
Joined: Thu Aug 13, 2020 9:24 am
Has thanked: 521 times
Been thanked: 598 times

Re: avoiding confusion

Post by Mary Ann »

I'd put some on mine but people would go back to calling me Ma.
Top
User avatar
Tubajug
Posts: 746
Joined: Thu Aug 13, 2020 10:27 am
Location: Nebraska
Has thanked: 225 times
Been thanked: 203 times

Re: avoiding confusion

Post by Tubajug »

Now you run the risk of mixing it up with your stubby Holton!
These users thanked the author Tubajug for the post:
bloke (Wed Mar 29, 2023 3:48 pm)
Jordan
King 2341 with Holton Monster Eb Bell
King/Conn Eb Frankentuba
Pan AmeriConn BBb Helicon
Yamaha YBB-103

"No one else is placed exactly as we are in our opportune human orbits."
Top
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4119 times

Re: avoiding confusion

Post by bloke »

I've been wondering about soldering an 9" x 12" piece of white-painted sheet steel to the "U" portion of my cimbasso bell - so it would accept magnetic letters - and renting that advertising space out to businesses...

JACKSON
PLUMBING
731-555-6449

...etc.
Last edited by bloke on Wed Mar 29, 2023 4:33 pm, edited 1 time in total.
These users thanked the author bloke for the post:
MN_TimTuba (Tue Apr 04, 2023 7:46 pm)
Top
The Big Ben
Posts: 409
Joined: Thu Aug 13, 2020 12:38 pm
Has thanked: 34 times
Been thanked: 62 times

Re: avoiding confusion

Post by The Big Ben »

That's like drummers putting their initials on their bass drum...
These users thanked the author The Big Ben for the post:
bloke (Wed Mar 29, 2023 4:33 pm)
Top
York-aholic
Posts: 1439
Joined: Thu Aug 13, 2020 10:39 pm
Location: SoCal
Has thanked: 1567 times
Been thanked: 468 times

Re: avoiding confusion

Post by York-aholic »

Someone needs a hobby…

:popcorn:
Some old Yorks, Martins, and perhaps a King rotary valved CC
Top
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4119 times

Re: avoiding confusion

Post by bloke »

York-aholic wrote: ↑Wed Mar 29, 2023 6:27 pm Someone needs a hobby…

:popcorn:
I had to re-lacquer it, anyway. :coffee:

That aerosol "epoxy" clear lacquer (that I discussed in the repair forum - that I was testing out) ain't worth a crap.
These users thanked the author bloke for the post:
York-aholic (Wed Mar 29, 2023 10:20 pm)
Top
User avatar
russiantuba
Posts: 355
Joined: Thu Aug 13, 2020 8:04 am
Location: Circleville, Ohio
Has thanked: 15 times
Been thanked: 97 times
Contact:
Contact russiantuba

Re: avoiding confusion

Post by russiantuba »

Trombones discovered the secret of the counterweight years ago. Now, could we do this with a GPS tracker?
These users thanked the author russiantuba for the post:
jtm (Wed Mar 29, 2023 10:03 pm)
Dr. James M. Green
Lecturer in Music--Ohio Northern University
Adjunct Professor of Music--Ohio Christian University
Gronitz PF 125
Miraphone 1291CC
Miraphone Performing Artist
www.russiantuba.com
Top
User avatar
Mary Ann
Posts: 3038
Joined: Thu Aug 13, 2020 9:24 am
Has thanked: 521 times
Been thanked: 598 times

Re: avoiding confusion

Post by Mary Ann »

Actually, instead of JS, shouldn't you have put FB?
Top
P@rick
Posts: 40
Joined: Thu Sep 24, 2020 5:20 pm
Location: The Netherlands
Has thanked: 23 times
Been thanked: 12 times

Re: avoiding confusion

Post by P@rick »

Does the slide even stay in with all that extra weight? ;-)
Top
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4119 times

Re: avoiding confusion

Post by bloke »

P@rick wrote: ↑Wed Apr 05, 2023 4:30 am Does the slide even stay in with all that extra weight? ;-)
I was having trouble with it coming out just from playing it before (when I shortened it for easier A=440 playing, I aligned it really well) but I built a friction brake for it. That can be seen in the repair forum.
Top
User avatar
arpthark
Posts: 3954
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 961 times
Been thanked: 1083 times
Contact:
Contact arpthark

Re: avoiding confusion

Post by arpthark »

How'd you make these? Bending, cutting? What's the material?
Top
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4119 times

Re: avoiding confusion

Post by bloke »

arpthark wrote: ↑Wed Apr 05, 2023 7:35 am How'd you make these? Bending, cutting? What's the material?
They are just cheap brass letters made in India that I found by clicking around on the internet. I may take them back off.
The lacquer I tested on this slide earlier was failing, so I went ahead and put the right lacquer on it and thought this might be a good joke.
Top
User avatar
arpthark
Posts: 3954
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 961 times
Been thanked: 1083 times
Contact:
Contact arpthark

Re: avoiding confusion

Post by arpthark »

Dang, I almost gave you too much credit for cutting these out of nickel silver or something.
Top
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4119 times

Re: avoiding confusion

Post by bloke »

arpthark wrote: ↑Wed Apr 05, 2023 7:53 am Dang, I almost gave you too much credit for cutting these out of nickel silver or something.
You can give me credit for doing that, because I could, but I wouldn't waste that much time. Further, I would probably cut them out in an actual font.
Top
Post Reply

Return to “Music Chatter”