Yamaclone F arrived!

Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
User avatar
bloke
Mid South Music
Posts: 19329
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3852 times
Been thanked: 4102 times

Re: Yamaclone F arrived!

Post by bloke »

I would assume that there are a ton of people who would purchase a 621f before they would purchase a knockoff.

That having been said, I've watched quite a few people over the years sell their 621f tubas and buy fancier ones that weren't nearly as good.

I could own and play a 621. I'm not saying I'd be enthusiastic about it, but I could. There are other F tubas that I absolutely could not own and use.
These users thanked the author bloke for the post:
cjk (Tue Apr 25, 2023 5:57 pm)


MikeMason
Posts: 228
Joined: Sat Aug 22, 2020 8:42 am
Has thanked: 7 times
Been thanked: 53 times

Re: Yamaclone F arrived!

Post by MikeMason »

Mine always sounds better in recordings than it does to my ear while playing. Fwiw
Yamaha 621 w/16’’ bell w/Laskey 32h
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
User avatar
Rick Denney
Resident Genius
Posts: 1032
Joined: Thu Aug 13, 2020 8:24 am
Has thanked: 57 times
Been thanked: 335 times

Re: Yamaclone F arrived!

Post by Rick Denney »

MikeMason wrote:Mine always sounds better in recordings than it does to my ear while playing. Fwiw
My experience also.

Rick “at least back when I had chops” Denney
MikeMason
Posts: 228
Joined: Sat Aug 22, 2020 8:42 am
Has thanked: 7 times
Been thanked: 53 times

Re: Yamaclone F arrived!

Post by MikeMason »

So, how much was the total cost? Including all fees and shipping?
Yamaha 621 w/16’’ bell w/Laskey 32h
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
User avatar
arpthark
Posts: 3915
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 956 times
Been thanked: 1073 times
Contact:

Re: Yamaclone F arrived!

Post by arpthark »

MikeMason wrote: Wed Apr 26, 2023 5:23 am So, how much was the total cost? Including all fees and shipping?
Just slightly over $2,000. I want to say like $2,050 or something.
These users thanked the author arpthark for the post:
cjk (Wed Apr 26, 2023 8:49 am)
MikeMason
Posts: 228
Joined: Sat Aug 22, 2020 8:42 am
Has thanked: 7 times
Been thanked: 53 times

Re: Yamaclone F arrived!

Post by MikeMason »

Wow. We need a comparison with a real one. I’m guessing the real one isn’t 4 times better.
These users thanked the author MikeMason for the post:
cjk (Wed Apr 26, 2023 8:49 am)
Yamaha 621 w/16’’ bell w/Laskey 32h
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
User avatar
arpthark
Posts: 3915
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 956 times
Been thanked: 1073 times
Contact:

Re: Yamaclone F arrived!

Post by arpthark »

I'm already impressed with it. Once I get this loose solder joint or whatever is buzzing fixed, it'll be quite the player.

Anybody in the NYC metro/New England area with a real YFB-621 who wants to meet up to A/B compare, just let me know.
User avatar
djtubat
Posts: 18
Joined: Tue Jan 24, 2023 8:42 am
Has thanked: 0
Been thanked: 10 times
Contact:

Re: Yamaclone F arrived!

Post by djtubat »

my tuba has also arrived. I will test and report in more detail. but the first impression is very good. only the lead pipe angle is not yet optimal.
These users thanked the author djtubat for the post:
jonesbrass (Wed Apr 26, 2023 4:25 pm)
User avatar
djtubat
Posts: 18
Joined: Tue Jan 24, 2023 8:42 am
Has thanked: 0
Been thanked: 10 times
Contact:

Yamaclone F arrived!

Post by djtubat »

https://on.soundcloud.com/ViH3G1dvbTwrorzw9

Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.

Have fun listening to the recording.
(Headphones recommended)
These users thanked the author djtubat for the post (total 4):
arpthark (Mon May 08, 2023 10:48 am) • Mary Ann (Mon May 08, 2023 11:44 am) • bone-a-phone (Mon May 08, 2023 6:36 pm) • Estubist (Wed May 10, 2023 8:52 am)
User avatar
Mary Ann
Posts: 3037
Joined: Thu Aug 13, 2020 9:24 am
Has thanked: 520 times
Been thanked: 598 times

Re: Yamaclone F arrived!

Post by Mary Ann »

I'm impressed. High A in there too.







Gesendit mit computer und fangers
Last edited by Mary Ann on Tue May 09, 2023 2:24 pm, edited 1 time in total.
User avatar
arpthark
Posts: 3915
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 956 times
Been thanked: 1073 times
Contact:

Re: Yamaclone F arrived!

Post by arpthark »

djtubat wrote: Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9

Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.

Have fun listening to the recording.
(Headphones recommended)
Fantastic. Sounds great. What is your recording setup?
User avatar
djtubat
Posts: 18
Joined: Tue Jan 24, 2023 8:42 am
Has thanked: 0
Been thanked: 10 times
Contact:

Re: Yamaclone F arrived!

Post by djtubat »

arpthark wrote:
djtubat wrote: Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9

Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.

Have fun listening to the recording.
(Headphones recommended)
Fantastic. Sounds great. What is your recording setup?
my recording setup: rode nt-5 and an old Yamaha standalone recording mixer.


Gesendet von iPhone mit Tapatalk
LibraryMark
Posts: 110
Joined: Thu Aug 13, 2020 3:37 pm
Has thanked: 70 times
Been thanked: 23 times

Re: Yamaclone F arrived!

Post by LibraryMark »

djtubat wrote: Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9

Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.

Have fun listening to the recording.
(Headphones recommended)
So all 4 parts on the F then? Sounds nice!
User avatar
djtubat
Posts: 18
Joined: Tue Jan 24, 2023 8:42 am
Has thanked: 0
Been thanked: 10 times
Contact:

Re: Yamaclone F arrived!

Post by djtubat »

LibraryMark wrote:
djtubat wrote: Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9

Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.

Have fun listening to the recording.
(Headphones recommended)
So all 4 parts on the F then? Sounds nice!
4th part is played on c tuba


Gesendet von iPhone mit Tapatalk
These users thanked the author djtubat for the post:
LibraryMark (Tue May 09, 2023 3:21 pm)
bone-a-phone
Posts: 343
Joined: Fri Aug 14, 2020 7:03 am
Has thanked: 116 times
Been thanked: 93 times

Re: Yamaclone F arrived!

Post by bone-a-phone »

djtubat wrote: Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9

Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.

Have fun listening to the recording.
(Headphones recommended)
How much electronic tweaking was there on the intonation? Would it be possible to hear a raw recording? It has a processed sound because it's just a little too perfect. The sound is impressive, but I know even bad recordings can sound great after all the beats and intonation are lined up. Not a knock on your performance, just want to honestly see what the horn's warts look like. The sound is really remarkable from something so inexpensive.
User avatar
djtubat
Posts: 18
Joined: Tue Jan 24, 2023 8:42 am
Has thanked: 0
Been thanked: 10 times
Contact:

Yamaclone F arrived!

Post by djtubat »

bone-a-phone wrote:
djtubat wrote: Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9

Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.

Have fun listening to the recording.
(Headphones recommended)
How much electronic tweaking was there on the intonation? Would it be possible to hear a raw recording? It has a processed sound because it's just a little too perfect. The sound is impressive, but I know even bad recordings can sound great after all the beats and intonation are lined up. Not a knock on your performance, just want to honestly see what the horn's warts look like. The sound is really remarkable from something so inexpensive.
I had to correct the rhythm of the last 2-3 bars because otherwise it would have been difficult with the ritardando. there is no processing other than reverb and compressor/limiter on the master channel.
I swear to god I didn't correct the intonation!
bone-a-phone
Posts: 343
Joined: Fri Aug 14, 2020 7:03 am
Has thanked: 116 times
Been thanked: 93 times

Re: Yamaclone F arrived!

Post by bone-a-phone »

djtubat wrote: Tue May 09, 2023 12:01 am I swear to god I didn't correct the intonation!
Very impressive. Nice tone, too.
User avatar
Mary Ann
Posts: 3037
Joined: Thu Aug 13, 2020 9:24 am
Has thanked: 520 times
Been thanked: 598 times

Re: Yamaclone F arrived!

Post by Mary Ann »

Curious as to what mpc you apparently already had that fits so well with this. I have a horn-playing friend (also with dystonia) whom I'm trying to talk into getting in to tuba. She is about my size, which might mean the wrist problem is there, but she could afford what you paid and an F tuba is a great place for a horn player to start. I'd want to recommend a mpc that works well, which is why I'm asking. She is very talented and determined and would be able to start on good equipment and just adjust to it.
Pat S
Posts: 8
Joined: Tue Dec 13, 2022 9:13 am
Has thanked: 1 time
Been thanked: 2 times

Re: Yamaclone F arrived!

Post by Pat S »

Ditto, curious about the mouthpiece for what appears to be an effortless high range!
User avatar
djtubat
Posts: 18
Joined: Tue Jan 24, 2023 8:42 am
Has thanked: 0
Been thanked: 10 times
Contact:

Re: Yamaclone F arrived!

Post by djtubat »

Mouthpiece is a very individual thing and I don't know if my mouthpiece fits you. I play a custom-made mouthpiece, cup diameter 31.66mm, bore 8.1mm. the cup is relatively deep for an f tuba mouthpiece, the back bore is not extremely large.

for this small f tuba I would prefer a mouthpiece with a deep cup (for a nice dark sound). however, there are certainly mouthpieces that respond more easily in the high register. it depends on the purpose
Post Reply