Never seen one of these. The valves look like Bauerfeind?
Seller says ca. 1990s.
https://www.ebay.com/itm/334939365809?m ... media=COPY
eBay: Hirsbrunner "Crown" 3v compensating baritone
- arpthark
- Posts: 3916
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 956 times
- Been thanked: 1073 times
- Contact:
- aarongsmith
- Posts: 56
- Joined: Wed Jun 29, 2022 8:40 am
- Location: Maryland
- Has thanked: 10 times
- Been thanked: 16 times
Re: eBay: Hirsbrunner "Crown" 3v compensating baritone
If I'm not mistaken Hirsbrunner, Gronitz, and Willson were all using Bauerfeind for a while until Adams bought Bauerfeind out.
Rudolf Meinl 5/4CC
Willson 3400FA-5 Eb
Besson New Standard Euph
S.E. Shires Bass w/ Greenhoe Valves
Willson 3400FA-5 Eb
Besson New Standard Euph
S.E. Shires Bass w/ Greenhoe Valves
-
- Posts: 2051
- Joined: Thu Aug 13, 2020 11:25 am
- Has thanked: 218 times
- Been thanked: 165 times
Re: eBay: Hirsbrunner "Crown" 3v compensating baritone
I like the design... It is a stealth comp with the valve loops away from the audience, which also puts the mts next to the off hand.
"Crown!"
"Crown!"
"All art is one." -Hal
- bloke
- Mid South Music
- Posts: 19331
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3853 times
- Been thanked: 4103 times
Re: eBay: Hirsbrunner "Crown" 3v compensating baritone
I acquired (for flipping) a late-era (so-called HB-21 - ie. 392) C instrument - years ago - which featured plated pistons with fancy little adjustable valve guides (adjusted in and out).
The thing is this:
They were identical to the pistons found on B&S/M-W tubas OTHER THAN
- nickel plated, rather than unplated stainless steel
- those gimmicky valve guides
- valve tracks in the casings and clock-location of guides on the pistons were different.
The tuba that I picked up was inexpensive, because it was missing all four pistons.
I had some B&S/M-W pistons, and was just about to move the guides on the pistons that I had and lap those pistons into the Hb casings (all slightly snug), but Peter, Jr. offered me a set of four (as described above) which were all slightly dinged up, yet worked perfectly (bargain pricing). Dave Secrist had not yet retired and I sent the pistons to him to dress up (fill the little dents) and plate them back to the same dimensions.
(That way, it was less work for me, and I was able to hold on to my spare M-W/B&S pistons.)
I SUSPECT (??) that those plated pistons were sourced from the same fabricator as B&S/M-W pistons, but (simply) made just different enough to appear to be proprietary to Hb.
The thing is this:
They were identical to the pistons found on B&S/M-W tubas OTHER THAN
- nickel plated, rather than unplated stainless steel
- those gimmicky valve guides
- valve tracks in the casings and clock-location of guides on the pistons were different.
The tuba that I picked up was inexpensive, because it was missing all four pistons.
I had some B&S/M-W pistons, and was just about to move the guides on the pistons that I had and lap those pistons into the Hb casings (all slightly snug), but Peter, Jr. offered me a set of four (as described above) which were all slightly dinged up, yet worked perfectly (bargain pricing). Dave Secrist had not yet retired and I sent the pistons to him to dress up (fill the little dents) and plate them back to the same dimensions.
(That way, it was less work for me, and I was able to hold on to my spare M-W/B&S pistons.)
I SUSPECT (??) that those plated pistons were sourced from the same fabricator as B&S/M-W pistons, but (simply) made just different enough to appear to be proprietary to Hb.
- Mary Ann
- Posts: 3037
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 520 times
- Been thanked: 598 times
Re: eBay: Hirsbrunner "Crown" 3v compensating baritone
Same seller (I think) has a "C melody soprano sax." So what is that? And why something in C as that seems a bit odd. Unless it's for that crowd that reads by fingerings so they can play from a different clef? I almost never see a soprano sax being played anywhere. Lots of altos, tenors, baris, but no sopranos. I don't even know what a "regular" soprano sax reads, clef-wise; Bb treble clef, same as trumpet?
- arpthark
- Posts: 3916
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 956 times
- Been thanked: 1073 times
- Contact:
Re: eBay: Hirsbrunner "Crown" 3v compensating baritone
The instrument most commonly called the "C melody" sax is pitched in C between a Bb tenor and Eb alto; the C soprano is an octave higher. Production on both stopped around 1930. You can read more about them here:Mary Ann wrote: ↑Sat Jul 08, 2023 9:28 am Same seller (I think) has a "C melody soprano sax." So what is that? And why something in C as that seems a bit odd. Unless it's for that crowd that reads by fingerings so they can play from a different clef? I almost never see a soprano sax being played anywhere. Lots of altos, tenors, baris, but no sopranos. I don't even know what a "regular" soprano sax reads, clef-wise; Bb treble clef, same as trumpet?
https://en.m.wikipedia.org/wiki/C_melody_saxophone
https://en.m.wikipedia.org/wiki/C_soprano_saxophone
Blake
Bean Hill Brass
Bean Hill Brass
-
- Posts: 321
- Joined: Sun Aug 16, 2020 5:50 pm
- Has thanked: 36 times
- Been thanked: 98 times