I've probably bought 4 borescopes over the years, but this one is the best. No computer or cell phone to connect to, super thin head for going around corners, with a cable that is stiff enough that you feel like you have control over it
It also has good battery life and you can record what you are seeing on a SD card
The downside is the 45 degree mirror was total crap. Loses a star for that
9 out of 10 stars
0.15 Inch (3.9mm) Industrial Endoscope Camera Zealtron 4.3'' IPS Screen Borescope Inspection Camera 1080P HD Snake Camera with 6 LED Lights,Sewer Camera 5M Cable for Car Sewer Drain Checking https://a.co/d/ayZl2mZ
My favorite borescope
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
-
Heavy_Metal
- Posts: 345
- Joined: Sat Aug 15, 2020 5:23 pm
- Location: Baltimore, MD, USA
- Has thanked: 54 times
- Been thanked: 96 times
Re: My favorite borescope
Thanks- just ordered one.
Principal tuba, Bel Air Community Band
Old (early 1900s?) Alexander BBb proto-163
1976 Sonora (B&S 101) 4-rotor BBb
1964 Conn 20J/21J BBb (one body, both bells)
1970s Marzan Slant-rotor BBb
~1904 York 3P BBb Helicon
Old Alex Comp.F, in shop
Old (early 1900s?) Alexander BBb proto-163
1976 Sonora (B&S 101) 4-rotor BBb
1964 Conn 20J/21J BBb (one body, both bells)
1970s Marzan Slant-rotor BBb
~1904 York 3P BBb Helicon
Old Alex Comp.F, in shop
-
Rick Denney
- Resident Genius
- Posts: 1032
- Joined: Thu Aug 13, 2020 8:24 am
- Has thanked: 57 times
- Been thanked: 335 times
Re: My favorite borescope
The head is thin but looks too long to go around a knuckle. What’s your experience with that?
Rick “always the main problem for seeing valve ports” Denney
Rick “always the main problem for seeing valve ports” Denney
- These users thanked the author Rick Denney for the post:
- the elephant (Tue Aug 01, 2023 4:13 pm)
-
LeMark
- Site Admin
- Posts: 2838
- Joined: Wed Aug 12, 2020 8:03 am
- Location: Arlington TX
- Has thanked: 77 times
- Been thanked: 821 times
Re: My favorite borescope
it wont go around a knuckle at all. it is good for shoving down a leadpipe to check valve alignment, that's what I use it for.
Yep, I'm Mark
