btw...Do NOT compliment me !
I ALREADY post about 50X as much as I should.
Bach 18 in Stainless?
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
-
bloke
- Mid South Music
- Posts: 19373
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3859 times
- Been thanked: 4119 times
Re: Bach 18 in Stainless?
Brass threads are "stretchy"...which is why Dave Houser's (stainless steel - HARD) threaded tuba mouthpiece components define that they PARTICULARLY be dialed in.
btw...Do NOT compliment me !
I ALREADY post about 50X as much as I should.
btw...Do NOT compliment me !
I ALREADY post about 50X as much as I should.
-
donn
- Posts: 1349
- Joined: Mon Oct 26, 2020 2:31 pm
- Location: Portugal
- Has thanked: 6 times
- Been thanked: 169 times
Re: Bach 18 in Stainless?
If it's about my Kalison story ... I don't recall what I tried, but standard M4 would have been the obvious thing ... nope. Now, the M4 x .75 that bloke alluded to above, likely I had never heard of such a thing and it's closer to 8-32. My new bolts need an occasional tightening, but they're better than the repair shop's leadpipe bolt, which I think I eventually fixed with red loktite. Oops, there goes my rock star status.Dents Be Gone! wrote: ↑Thu Aug 17, 2023 1:56 pm Soooo, an 8-32 is pretty close-ish to an M4, which may have been where those holes started (I don’t actually know, but am guessing). My next guess is that you partially cut and partially sort of burnished the original threads into accepting the new 8-32. Brass is also pretty plastic and malleable. And you are a rock star for making work!
-
bloke
- Mid South Music
- Posts: 19373
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3859 times
- Been thanked: 4119 times
-
bloke
- Mid South Music
- Posts: 19373
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3859 times
- Been thanked: 4119 times
Re: Bach 18 in Stainless?
If anybody needs their silver plated mouthpieces made to be raw brass, I'll take care of it as long as they give me a batch of them, but please have your local guy polish them. I've got enough polishing to do.
Re: Bach 18 in Stainless?
I contacted Kelly about a stainless steel 18 and got the following response:hrender wrote: ↑Wed Aug 16, 2023 8:58 am Kelly makes a nice 18 in plastic, but for some reason I think it's the only one of their models that they don't offer in stainless steel. It might be worth an inquiry. The only other option I know is to see if someone like Dave Houser would duplicate yours. It's one of their listed services. Giddings also does duplication.
So, that's a dead-end unless you want to try one of their other models. Houser may still be an option, thought it would likely take a while.We are not setup to manufacture custom mouthpieces.
Our nearest to your request is our 2-piece / 316-Surgical-Stainless-Steel / KELLYberg / Tuba Mouthpiece...
-
ken herrick
- Posts: 87
- Joined: Thu Aug 13, 2020 11:11 am
- Has thanked: 0
- Been thanked: 11 times
-
bloke
- Mid South Music
- Posts: 19373
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3859 times
- Been thanked: 4119 times
Re: Bach 18 in Stainless?
I don't think titanium coating works out quite as well on non-ferrous soft metals as it does on steel.