WTB: 45° Angle Sousaphone Bit

[Tubajug]

Hello everyone,

In playing my helicon that I built, I've noticed I have to tilt my head down to reach the mouthpiece, no matter what configuration I try with the bits. I'm using just the bits I've got around, which is one Reynolds and one Conn bit. The Reynolds is a 45° angle, but the Conn is much shallower. I figure if I had another 45° bit it would help me get it closer to my mouth and at a more comfortable angle.

I'm not looking to spend a ton of money on new bits like you can find on eBay. I'm hoping someone has something rolling around in their spare parts drawer that they would be willing to part with.

Thanks!

[iiipopes]

Try the chart post #2 in this thread:
https://tubaforum.net/viewtopic.php?p=7 ... art#p74459
Maybe the Jupiter?

[Tubajug]

Try the chart post #2 in this thread:
https://tubaforum.net/viewtopic.php?p=7 ... art#p74459
Maybe the Jupiter?

Thanks! Now that I see the chart, my Reynolds bit isn't quite a 45° angle, but still not as shallow as the Conn bits.

[arpthark]

I think I have one that you can have for the cost of postage plus a pittance for my gas, but I was just looking in that parts drawer and I noticed that a mouse had recently given birth there, so let me ignore that completely for a couple days and come back to it.

[Tubajug]

I think I have one that you can have for the cost of postage plus a pittance for my gas, but I was just looking in that parts drawer and I noticed that a mouse had recently given birth there, so let me ignore that completely for a couple days and come back to it.

Oh man, that's not what I expected to read when I opened up this thread...Have a great day! And all the best to the new mommy!

[arpthark]

I think I have one that you can have for the cost of postage plus a pittance for my gas, but I was just looking in that parts drawer and I noticed that a mouse had recently given birth there, so let me ignore that completely for a couple days and come back to it.

Oh man, that's not what I expected to read when I opened up this thread...Have a great day! And all the best to the new mommy!

I believe my exact words were "Oh man, Mama Mouse!" Three or four tiny pink mice and three or four adolescents were in there along with Mama Mouse. So, I am gonna leave them be for a little while. They had made a nice little nest out of a silver polishing cloth.

I should probably be more adamant about mouse-proofing my workshop (ca. 1880s barn/shed). Although, if they get inside the house and the cats find them, it's every mouse for him/herself.

[Tubajug]

Yeah, we live in an older house (ca. 1900) and used to have issues with mice every year. Now that we have cats, we haven't seen any! Other than the two that the cats have gotten...

[humBell]

Please forgive me for being obtuse...

45 degrees is a very sharp angle.

You don't by any chance mean 135 degrees?

[Tubajug]

Please forgive me for being obtuse...

45 degrees is a very sharp angle.

You don't by any chance mean 135 degrees?

Haha, I guess this is why I didn't become a mathemagician...

Thanks for the correction!

[humBell]

Please forgive me for being obtuse...

45 degrees is a very sharp angle.

You don't by any chance mean 135 degrees?

Haha, I guess this is why I didn't become a mathemagician...

Thanks for the correction!

It has been a while since i read that book.

Just as long as rhyme and reason are safe...

(and o' course i'm pretty sure everyone knew what ya meant. On the other hand i think i am always on the look out for odd angled bits, so i'd grab a 45 degree bit without thinking.)

[arpthark]

i'd grab a 45 degree bit without thinking

Pretty much guaranteed if you are playing sousaphone outdoors in the winter.

Jordan, I will brave the mouse drawer soon. Probably not tonight, but soon.

[arpthark]

Okay, the mice have moved out.

What size did you need, @Tubajug ?

This one features a male end with an OD of 15mm/.059". Seems a bit big. I'm thinking it might be Holton.

[bloke]

Olds/Reynolds India fakes...cheap

https://www.ebay.com/itm/256313057566

[Tubajug]

Okay, the mice have moved out.

What size did you need, @Tubajug ?

This one features a male end with an OD of 15mm/.059". Seems a bit big. I'm thinking it might be Holton.

I sent you a message via FB. Thanks!

[matt g]

I have a couple of Yamaha bits like this if you want them. Just pay postage. They’re probably 30 years old now.

[Tubajug]

I have a couple of Yamaha bits like this if you want them. Just pay postage. They’re probably 30 years old now.

I sent you a PM. Thanks!