Hey! I resemble that remark!Three Valves wrote: ↑Sat Nov 14, 2020 9:28 amThat’s an overhang, not a ledge!!
Standing harness for tuba
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
- Doc
- Posts: 2472
- Joined: Thu Aug 13, 2020 9:48 am
- Location: Downtown Browntown
- Has thanked: 846 times
- Been thanked: 767 times
- Contact:
Re: Standing harness for tuba
Welcome to Browntown!
Home of the Brown Note!
Home of the Brown Note!
- ernieball
- Posts: 7
- Joined: Thu Aug 13, 2020 9:13 am
- Location: Worcestershire, UK
- Has thanked: 0
- Been thanked: 1 time
- Contact:
Re: Standing harness for tuba
These are pricey and probably won't get to the US for christmas, but they look brilliant
https://aufbauhaus.wixsite.com/croxbelt
They work on Sousaphones too!
https://aufbauhaus.wixsite.com/croxbelt
They work on Sousaphones too!
Any idiot can play the guitar. It takes a special kind of idiot to play the Bass.
-
- Posts: 189
- Joined: Thu Aug 13, 2020 6:26 pm
- Location: Tampa, FL
- Has thanked: 81 times
- Been thanked: 48 times
Re: Standing harness for tuba
Thank you, a link I have noted for the future. This looks extremely well engineeredernieball wrote: ↑Sun Nov 15, 2020 4:42 am These are pricey and probably won't get to the US for christmas, but they look brilliant
https://aufbauhaus.wixsite.com/croxbelt
They work on Sousaphones too!
2014 Wisemann 900
2013 Miraphone 188
2013 Miraphone 188
- Snake Charmer
- Posts: 152
- Joined: Sat Aug 22, 2020 8:49 am
- Location: Schifferstadt, Germany
- Has thanked: 0
- Been thanked: 69 times
Re: Standing harness for tuba
Another source in Germany is Rudi Schwarz.
www.schwarz-gurte.de
He plays tuba and made his own harness, then a lot of band colleagues asked and he started his business for all kinds of heavy/awkward to hold instruments.
www.schwarz-gurte.de
He plays tuba and made his own harness, then a lot of band colleagues asked and he started his business for all kinds of heavy/awkward to hold instruments.
...with a song in my heart!
- matt g
- Posts: 2580
- Joined: Thu Aug 13, 2020 10:37 am
- Location: Southeastern New England
- Has thanked: 263 times
- Been thanked: 554 times
Re: Standing harness for tuba
I’m surprised no one has remade the old Blue Note tuba strap. I used one for years and it was great.
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
Meinl-Weston 2165 (sold)
- greenbean
- Damn good stuff
- Posts: 444
- Joined: Thu Aug 13, 2020 11:19 pm
- Has thanked: 4 times
- Been thanked: 102 times
Re: Standing harness for tuba
This thread got me thinking...
Here is the first two stabs at a tuba belt: https://photos.app.goo.gl/PU9s416ohskg5q2G7
The first snap hook worked well but was almost impossible to take OFF the tuba. The second one is better. It is the only non-rotating snap hook that my suppliers carry, which seemed to work fine. Available in 1" only. Also okay.
The real problem is the carriage hooks on tubas are all over the place. The distance of the carriage hook from the mouthpiece receiver will determine where on my body I have to position the tuba belt. Good luck with that one! I think a harness makes a lot more sense.
Maybe someday...
Here is the first two stabs at a tuba belt: https://photos.app.goo.gl/PU9s416ohskg5q2G7
The first snap hook worked well but was almost impossible to take OFF the tuba. The second one is better. It is the only non-rotating snap hook that my suppliers carry, which seemed to work fine. Available in 1" only. Also okay.
The real problem is the carriage hooks on tubas are all over the place. The distance of the carriage hook from the mouthpiece receiver will determine where on my body I have to position the tuba belt. Good luck with that one! I think a harness makes a lot more sense.
Maybe someday...
Tom Rice
www.superfinecases.com
Currently playing...
1973 Mirafone 184 BBb
1972 Böhm & Meinl Marzan BBb
-
- Posts: 15
- Joined: Fri Aug 21, 2020 6:36 am
- Location: Zürich, Switzerland
- Has thanked: 9 times
- Been thanked: 1 time
- Contact:
Re: Standing harness for tuba
I know Jürg, he is an engineer who plays tuba, sousaphone and piano, he showed me his croxbelt after a gig we both played years ago. Can only recommend them. He also is a very nice guy. Caveat: I don't own a croxbelt though, because I refuse to play standing or walking.Worth wrote: ↑Sun Nov 15, 2020 5:17 pmThank you, a link I have noted for the future. This looks extremely well engineeredernieball wrote: ↑Sun Nov 15, 2020 4:42 am These are pricey and probably won't get to the US for christmas, but they look brilliant
https://aufbauhaus.wixsite.com/croxbelt
They work on Sousaphones too!
spirtuba
MW 2040/5, 2141
B&S pt20, pt6
MW 2040/5, 2141
B&S pt20, pt6
- MN_TimTuba
- Posts: 598
- Joined: Thu Aug 13, 2020 3:33 pm
- Location: Wadena County, Minnesota
- Has thanked: 728 times
- Been thanked: 167 times
Re: Standing harness for tuba
Brett,
Did you ever make a purchase?
If not, I can certainly lend you my Neo-tech for a spell. I believe we're roughly the same size, so it should fit you well enough. I can drop it with my kids N of 694, or send via mail if you like.
Let me know.
Tim
Did you ever make a purchase?
If not, I can certainly lend you my Neo-tech for a spell. I believe we're roughly the same size, so it should fit you well enough. I can drop it with my kids N of 694, or send via mail if you like.
Let me know.
Tim
MN_Tim
Lee Stofer Custom 2341-5
Miraphone 83 Eb
Miraphone 191-5 (formerly)
Holton BBb345 (formerly and fondly)
Lee Stofer Custom 2341-5
Miraphone 83 Eb
Miraphone 191-5 (formerly)
Holton BBb345 (formerly and fondly)
- sdloveless
- Posts: 198
- Joined: Sun Aug 23, 2020 5:32 pm
- Location: Harrisburg, Pennsylvania, USA
- Has thanked: 32 times
- Been thanked: 15 times
Re: Standing harness for tuba
Received my Neotech XL harness today from Dillon Music. Matt said it would be kinda hard to set up, but once I figured it out it would be very comfy. I'll try to spend some time with it this weekend and will report back here.
Scott Loveless
Pennsylvania, USA
1939 King 1240, JP179B
"When life knocks you down, stay there and take a nap."
Pennsylvania, USA
1939 King 1240, JP179B
"When life knocks you down, stay there and take a nap."