A Wild Hair…
Posted: Tue Oct 22, 2024 2:35 pm
I need some assistance from you fix-it sorts who are accurate with taking measurements.
I need the length of a Mirafone 186-5U CC 5th slice circuit — from valve ferrule to valve ferrule (with the slide pushed all the way in) — for the old-style flat major third setup. I need this to be as accurate as reasonably possible (within about a quarter of an inch).
Please post here if you can take this measurement in the next few days. I need it ASAP, but better late than not at all…
HELP! I have what could prove to be a very cool project that I would like to move up from the back burner.
I need the length of a Mirafone 186-5U CC 5th slice circuit — from valve ferrule to valve ferrule (with the slide pushed all the way in) — for the old-style flat major third setup. I need this to be as accurate as reasonably possible (within about a quarter of an inch).
Please post here if you can take this measurement in the next few days. I need it ASAP, but better late than not at all…
HELP! I have what could prove to be a very cool project that I would like to move up from the back burner.