Larger Bore, Shallower Mouthpiece
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Larger Bore, Shallower Mouthpiece
Many larger bore horns have less intonation issues with slightly shallower mouthpieces. Discuss....
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Re: Larger Bore, Shallower Mouthpiece
I will start: The 186 I bought seemed to have some very quirky pitch issues, and I thought there was something wrong with it. I started playing with different mouthpieces, and settled on a Blokepiece Solo. With that slightly shallower mouthpiece, I have no adult fingerings or major slide pulling. Perhaps that is why they cam from the factory with a slightly shallower than normal C4 mouthpiece. If you look at old Alexander mouthpieces, they are EXTREMELY shallow with a flat cup. YMMV
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
-
- Posts: 1343
- Joined: Mon Oct 26, 2020 2:31 pm
- Location: Portugal
- Has thanked: 6 times
- Been thanked: 169 times
Re: Larger Bore, Shallower Mouthpiece
What's the throat diameter, on those old Alexander mouthpieces?
I've never noticed any effect on intonation, from a mouthpiece, but my theory in general is that we ascribe differences like that to volume or width because that's what we can see, not because that's what really makes the difference.
I've never noticed any effect on intonation, from a mouthpiece, but my theory in general is that we ascribe differences like that to volume or width because that's what we can see, not because that's what really makes the difference.
Last edited by donn on Wed Dec 23, 2020 10:02 am, edited 1 time in total.
Re: Larger Bore, Shallower Mouthpiece
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
- bloke
- Mid South Music
- Posts: 19323
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3852 times
- Been thanked: 4101 times
Re: Larger Bore, Shallower Mouthpiece
' no fewer issues, but shallow cups make it easier to lip the pitch higher, when they are flat...and most extra-large-bore tubas' pitch issues are FLAT pitch issues.
Something else:
The larger the valveset bore size, the less DIFFERENCE in the qualities of the resonance a different-shaped mouthpiece cup makes.
bloke "Now...Here's MORE stuff over which folks can argue. "
Something else:
The larger the valveset bore size, the less DIFFERENCE in the qualities of the resonance a different-shaped mouthpiece cup makes.
bloke "Now...Here's MORE stuff over which folks can argue. "
- Doc
- Posts: 2472
- Joined: Thu Aug 13, 2020 9:48 am
- Location: Downtown Browntown
- Has thanked: 846 times
- Been thanked: 767 times
- Contact:
Re: Larger Bore, Shallower Mouthpiece
0.772" or 19.6mm
That's not small, but it's not that large.
With my 186 CC, I'm using a Sellmansberger Imperial with Profundo (tall) rim - it is the perfect mouthpiece for this tuba, and it makes this tuba point-and-shoot. Larger mouthpieces (and smaller mouthpieces) do NOT do as well with response and intonation.
Welcome to Browntown!
Home of the Brown Note!
Home of the Brown Note!
Re: Larger Bore, Shallower Mouthpiece
Around here folks can argue over a stick.
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Re: Larger Bore, Shallower Mouthpiece
That is the ONE mouthpiece from Joe's line that I don't own - may have to correct that issue.
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
- bloke
- Mid South Music
- Posts: 19323
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3852 times
- Been thanked: 4101 times
Re: Larger Bore, Shallower Mouthpiece
Thank God...
I'll be able to make up my in-arrears yacht payment.
I'll be able to make up my in-arrears yacht payment.
- Doc
- Posts: 2472
- Joined: Thu Aug 13, 2020 9:48 am
- Location: Downtown Browntown
- Has thanked: 846 times
- Been thanked: 767 times
- Contact:
- matt g
- Posts: 2580
- Joined: Thu Aug 13, 2020 10:37 am
- Location: Southeastern New England
- Has thanked: 263 times
- Been thanked: 555 times
Re: Larger Bore, Shallower Mouthpiece
My 186 was fine with a C4, and just as fine with a SHII. Conn Helleberg (120S) too. Maybe I had a Bach 18 then too? I dunno. Pitch was fine with all of them.
On my 188, I settled on a Bach 7. That was based on timbre. Pitch was fine (darn near perfect) on all mouthpieces.
I’ve not noticed an mouthpiece really correct intonation issues of a tuba on its own. It might make certain parts of the register respond better or bring out overtones that aid in hearing the center of the pitch better. Like @bloke said, a smaller volume cup allows for the player to ride high if needed with less work.
Bore is such a tricky term anyhow. A Miraphone has about 8-10” more leadpipe than a typical York clone. I’d wager my 0.687 bore CC has a similar rate of taper to the end of the valves when compared to a 186/188.
It’s kinda like comparing the bore on a standard “American” style Bb trumpet to a rotary valve trumpet or a flugelhorn. Trumpet players would scoff at a flugelhorn having a 0.413 bore as compared to a 0.460 bore but not consider that the flugelhorn had 6” of pipe before the valves as compared to 18”.
Regardless, I don’t think there’s much a mouthpiece can influence in terms of intonation, but rather allows the player to alter the input buzz with improved ease.
On my 188, I settled on a Bach 7. That was based on timbre. Pitch was fine (darn near perfect) on all mouthpieces.
I’ve not noticed an mouthpiece really correct intonation issues of a tuba on its own. It might make certain parts of the register respond better or bring out overtones that aid in hearing the center of the pitch better. Like @bloke said, a smaller volume cup allows for the player to ride high if needed with less work.
Bore is such a tricky term anyhow. A Miraphone has about 8-10” more leadpipe than a typical York clone. I’d wager my 0.687 bore CC has a similar rate of taper to the end of the valves when compared to a 186/188.
It’s kinda like comparing the bore on a standard “American” style Bb trumpet to a rotary valve trumpet or a flugelhorn. Trumpet players would scoff at a flugelhorn having a 0.413 bore as compared to a 0.460 bore but not consider that the flugelhorn had 6” of pipe before the valves as compared to 18”.
Regardless, I don’t think there’s much a mouthpiece can influence in terms of intonation, but rather allows the player to alter the input buzz with improved ease.
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
Meinl-Weston 2165 (sold)
-
- Posts: 1045
- Joined: Thu Aug 13, 2020 8:41 am
- Has thanked: 41 times
- Been thanked: 80 times
Re: Larger Bore, Shallower Mouthpiece
Not entirely true when you look at the Russian-made tubas. .830'' bore, and very mouthpiece sensitive when it relates to resonance and response. A Rotary valve tuba that loves deep funnel-shaped mouthpieces like an American tuba unlike it's German counterparts (also rotary) with slightly smaller bores which like shallow/flat cups for the best results. Certainly goes against the grain.The larger the valveset bore size, the less DIFFERENCE in the qualities of the resonance a different-shaped mouthpiece cup makes.
06' Miraphone 187-4U
Re: Larger Bore, Shallower Mouthpiece
THAT is a twig, don't you know the difference?
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
- bloke
- Mid South Music
- Posts: 19323
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3852 times
- Been thanked: 4101 times
Re: Larger Bore, Shallower Mouthpiece
It seems to me that (after I've repaired a busted St. Pete for a school...typically: carriage arm supports) when I play a St. Pete with anything from a super-wide/deep Holton 52 down to a Miraphone 23, those tubas (via bell shape) are going to offer a coarse grunting type of sound.
They "feel" great to blow though, because they are "open".
They "feel" great to blow though, because they are "open".
-
- Posts: 1045
- Joined: Thu Aug 13, 2020 8:41 am
- Has thanked: 41 times
- Been thanked: 80 times
Re: Larger Bore, Shallower Mouthpiece
Grunting like a Lap Sousaphone? or Grunting like a 88mm panzer? I found more than on a couple occasions that the Yamaha Jim Self is an excellent choice on the Russian horns.
06' Miraphone 187-4U
- jtm
- Posts: 1108
- Joined: Sat Aug 15, 2020 2:51 pm
- Location: Austin, Texas
- Has thanked: 698 times
- Been thanked: 209 times
Re: Larger Bore, Shallower Mouthpiece
I don't have the brochure at hand... How does the Imperial compare to the Symphony?
John Morris
This practicing trick actually seems to be working!
playing some old German rotary tubas for free
This practicing trick actually seems to be working!
playing some old German rotary tubas for free
- Doc
- Posts: 2472
- Joined: Thu Aug 13, 2020 9:48 am
- Location: Downtown Browntown
- Has thanked: 846 times
- Been thanked: 767 times
- Contact:
- Doc
- Posts: 2472
- Joined: Thu Aug 13, 2020 9:48 am
- Location: Downtown Browntown
- Has thanked: 846 times
- Been thanked: 767 times
- Contact:
Re: Larger Bore, Shallower Mouthpiece
It’s not as bowl shaped, as deep, or as voluminous as the Symphony. I think (IIRC), the Imperial, while not a funnel a la Helleberg, it is the most funnel-ish mp in the line-up.
Welcome to Browntown!
Home of the Brown Note!
Home of the Brown Note!