Portland CL: Holton Eb
Posted: Thu May 13, 2021 11:20 am
TubaForum.net
Tuba & euphonium forum, message board, and community.
https://mail.tubaforum.net/
Portland CL: Holton Eb
Page 1 of 1
Re: Portland CL: Holton Eb
Posted: Thu May 13, 2021 12:50 pm
That's one good looking tuba!
Re: Portland CL: Holton Eb
Posted: Thu May 13, 2021 1:11 pm
Valves are in rough shape but it’s priced okay for a project. Probably a decent CC or BBb to be made with that bell and possibly bottom bow.
Re: Portland CL: Holton Eb
Posted: Thu May 13, 2021 1:24 pm
I’m wondering if the valveset bloke is selling would work?
Re: Portland CL: Holton Eb
Posted: Thu May 13, 2021 2:33 pm
Re: Portland CL: Holton Eb
Posted: Fri May 14, 2021 8:32 am
The bore may be too large on the one I’m selling…
.695”
three valve / top action
not many slide tubes incl.
.695”
three valve / top action
not many slide tubes incl.
Re: Portland CL: Holton Eb
Posted: Sat May 15, 2021 9:44 am
What's the story on the quilted appearance, on the bow guard?
At first this seemed like it might be original, but at a second look, likely added on top of the original bow guard during a repair, cut along the edges so it could bend around the curve without a lot of forming work.
At first this seemed like it might be original, but at a second look, likely added on top of the original bow guard during a repair, cut along the edges so it could bend around the curve without a lot of forming work.