~Sold~ 5/4 size Altieri tuba bag for sale
Posted: Wed May 26, 2021 4:23 pm
~Sold~
5/4 size Altieri tuba bag for sale:
Top loader's dream - Very good condition Altieri tuba bag in black with green piping and interior. (Green is lucky!) Back pack straps, shoulder strap and carry handle all functional. Giant storage compartment with smaller interior pockets. Clean.
$250 + $50 ground shipping from Tucson, Arizona. CONUS only. May consider trade of a decent bass guitar.
These start at $425 new, if you can find one in stock. Per the Altieri website as of today, they are not doing any custom tuba orders.
I believe this has been the situation for months.
The prior owner used this for a PT-6, not sure if it was custom made for that model or not. It swallows up my 43-in tall B&S rotary valve tuba no problem.
Bag measurements when empty and laid flat, as in the pictures:
50 in long
25 in wide at the midpoint
30 in wide at the bell opening
Valve cover: 9.5" long by 4 in wide
Bell cover: 19.5 in interior diameter, could be persuaded to accept a 20-in diameter bell without too much fuss I think, not 100% sure though.
Photos here: https://photos.app.goo.gl/VpqKoJp7SyteYvSv5
I think this will easily fit most 4/4 and 5/4 size horns. I will gladly accept a return of this in the same condition if it does not fit your horn. Buyer is responsible for return shipping.
5/4 size Altieri tuba bag for sale:
Top loader's dream - Very good condition Altieri tuba bag in black with green piping and interior. (Green is lucky!) Back pack straps, shoulder strap and carry handle all functional. Giant storage compartment with smaller interior pockets. Clean.
$250 + $50 ground shipping from Tucson, Arizona. CONUS only. May consider trade of a decent bass guitar.
These start at $425 new, if you can find one in stock. Per the Altieri website as of today, they are not doing any custom tuba orders.
I believe this has been the situation for months.
The prior owner used this for a PT-6, not sure if it was custom made for that model or not. It swallows up my 43-in tall B&S rotary valve tuba no problem.
Bag measurements when empty and laid flat, as in the pictures:
50 in long
25 in wide at the midpoint
30 in wide at the bell opening
Valve cover: 9.5" long by 4 in wide
Bell cover: 19.5 in interior diameter, could be persuaded to accept a 20-in diameter bell without too much fuss I think, not 100% sure though.
Photos here: https://photos.app.goo.gl/VpqKoJp7SyteYvSv5
I think this will easily fit most 4/4 and 5/4 size horns. I will gladly accept a return of this in the same condition if it does not fit your horn. Buyer is responsible for return shipping.
