Restoring the luster of a 123-year-old tuba

Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Post Reply
User avatar
Dave Detwiler
Posts: 186
Joined: Sat Aug 15, 2020 4:12 pm
Location: Harleysville, PA
Has thanked: 1 time
Been thanked: 190 times
Contact:

Restoring the luster of a 123-year-old tuba

Post by Dave Detwiler »

Hi all - I had the day off yesterday, and the weather was great, so I worked on cleaning and polishing the 1899 C. G. Conn American Model Monster BBb Bass that was graciously given to me a couple of weeks ago (see previous posts).

Here's the transformation!

Side-by-side comparison.jpg
Side-by-side comparison.jpg (194.91 KiB) Viewed 394 times

For those interested, here is the "recipe" that I went with, which was recommended to me by a repair/restoration specialist:

1. Thoroughly cleaned the tuba with a mild soap and water, then dried it off.
2. Wiped it down multiple times with Tarn-X to remove the tarnish, then rinsed it thoroughly.
3. Gently brushed it with a baking soda and water paste, then rinsed it thoroughly, and dried it off.
4. Lightly polished it with a tarnish-inhibiting polish (I used Hagerty's silver polish).

Also, I had previously suggested that the year the tuba was built was 1898, but Peggy Banks, at the National Music Museum, who is an expert on all things Conn, and has been researching serial numbers for decades, confirmed that it was built in 1899 (serial number 66235).

Finally, you'll notice that there are two tubes, that relate to the main tuning slide, that didn't polish up, as they are not silver plated. They are extension tubes that make the horn low pitch, and were perhaps added later.
Last edited by Dave Detwiler on Sat Mar 12, 2022 7:20 am, edited 3 times in total.
These users thanked the author Dave Detwiler for the post (total 5):
Nworbekim (Sat Mar 12, 2022 7:13 am) • York-aholic (Sat Mar 12, 2022 7:45 am) • Casca Grossa (Sat Mar 12, 2022 9:38 am) • rodgeman (Sat Mar 12, 2022 1:48 pm) • Heavy_Metal (Sat Mar 12, 2022 2:51 pm)


Played an F. E. Olds 4-valve BBb in high school (late '70s)
Led the USC Trojan Marching Band tuba section (early '80s)
Now playing an F. Schmidt (=VMI) 3301 and goofing around
on a 1925 Pan American Sousaphone and an 1899 Conn tuba!
User avatar
Nworbekim
Posts: 706
Joined: Thu Aug 13, 2020 8:18 am
Location: south central Kentucky near Lake Cumberland
Has thanked: 147 times
Been thanked: 36 times

Re: Restoring the luster of a 123-year-old tuba

Post by Nworbekim »

that's a nice job... i have a 1910ish york & sons little Eb that i need to do that with.
Miraphone 186 - King 2341 - JP179B - York & sons 1910 Eb - Meinl Weston 2145 - Wessex Festivo - King 2280
Play it with emotion and play it strong! Don't make a face and they won't know it's wrong!
User avatar
bort2.0
Posts: 5258
Joined: Thu Aug 13, 2020 9:13 am
Location: Minneapolis
Has thanked: 336 times
Been thanked: 1000 times

Re: Restoring the luster of a 123-year-old tuba

Post by bort2.0 »

Looks great! I wish I could have polished my horns outside! :)
York-aholic
Posts: 1439
Joined: Thu Aug 13, 2020 10:39 pm
Location: SoCal
Has thanked: 1567 times
Been thanked: 468 times

Re: Restoring the luster of a 123-year-old tuba

Post by York-aholic »

That engraving is gorgeous!

Nice job!

Is the leadpipe at a comfortable height? It looks quite low, but maybe the horn is so big that it just looks that way.

You have very nice friends.
Some old Yorks, Martins, and perhaps a King rotary valved CC
User avatar
the elephant
Posts: 3414
Joined: Thu Aug 13, 2020 8:39 am
Location: 404 - Not Found
Has thanked: 1907 times
Been thanked: 1353 times

Re: Restoring the luster of a 123-year-old tuba

Post by the elephant »

Dave, if you ever decide to have the dents removed or otherwise spend a chunk of money on this tuba, you could have a local tech buff out and then send off those extensions to Anderson for silver plating. For something that small it would not be super expensive. Since they are not original to the horn it would not be a "tuba blasphemy" to alter them. Then they would not stick out and detract from the overall look of the horn.

Just a thought.

I like the horn. Nice work!
Image
User avatar
Dave Detwiler
Posts: 186
Joined: Sat Aug 15, 2020 4:12 pm
Location: Harleysville, PA
Has thanked: 1 time
Been thanked: 190 times
Contact:

Re: Restoring the luster of a 123-year-old tuba

Post by Dave Detwiler »

York-aholic wrote: Sat Mar 12, 2022 7:45 am Is the leadpipe at a comfortable height? It looks quite low, but maybe the horn is so big that it just looks that way.
It is oddly low. I'm only 5'8", but I have to rest the bottom bow on my thighs to have the mouthpiece comfortably reach my mouth - never had to do that before!
These users thanked the author Dave Detwiler for the post:
York-aholic (Sat Mar 12, 2022 10:30 am)
Played an F. E. Olds 4-valve BBb in high school (late '70s)
Led the USC Trojan Marching Band tuba section (early '80s)
Now playing an F. Schmidt (=VMI) 3301 and goofing around
on a 1925 Pan American Sousaphone and an 1899 Conn tuba!
User avatar
Tubajug
Posts: 746
Joined: Thu Aug 13, 2020 10:27 am
Location: Nebraska
Has thanked: 226 times
Been thanked: 203 times

Re: Restoring the luster of a 123-year-old tuba

Post by Tubajug »

Beautiful! I've got an old Pan American sousaphone that could use this!
Jordan
King 2341 with Holton Monster Eb Bell
King/Conn Eb Frankentuba
Pan AmeriConn BBb Helicon
Yamaha YBB-103

"No one else is placed exactly as we are in our opportune human orbits."
User avatar
Dave Detwiler
Posts: 186
Joined: Sat Aug 15, 2020 4:12 pm
Location: Harleysville, PA
Has thanked: 1 time
Been thanked: 190 times
Contact:

Re: Restoring the luster of a 123-year-old tuba

Post by Dave Detwiler »

Tubajug wrote: Sat Mar 12, 2022 9:40 am Beautiful! I've got an old Pan American sousaphone that could use this!
Funny you should mention that - my son and I rescued an old, unused Pan American Sousaphone from his middle school years ago and treated it exactly in the same way as the tuba above (that's when I originally received the advice on how to clean and polish it):

1927 Pan American Sousaphone - before and after polishing.jpg
1927 Pan American Sousaphone - before and after polishing.jpg (147.55 KiB) Viewed 330 times
These users thanked the author Dave Detwiler for the post (total 3):
bort2.0 (Sat Mar 12, 2022 10:28 am) • York-aholic (Sat Mar 12, 2022 10:30 am) • Tubajug (Sat Mar 12, 2022 12:12 pm)
Played an F. E. Olds 4-valve BBb in high school (late '70s)
Led the USC Trojan Marching Band tuba section (early '80s)
Now playing an F. Schmidt (=VMI) 3301 and goofing around
on a 1925 Pan American Sousaphone and an 1899 Conn tuba!
Post Reply