venting valves

Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Post Reply
User avatar
Mary Ann
Posts: 3045
Joined: Thu Aug 13, 2020 9:24 am
Has thanked: 522 times
Been thanked: 598 times

venting valves

Post by Mary Ann »

How does one vent valves? Can a competent repair person do it? We have a local garage-type repair guy (tuba player) who will not ruin anything, which from me is a pretty high recommendation for someone who isn't in the full-time business of repair. He put the Joy key on my NStar without messing it up (previous owner had removed the spit valve.) He also fixed a sticky rotor in a French horn whose owner had actually sent the valves to be rebuilt by a well-known custom maker who did NOT fix the problem (for $1200) and the local guy found a burr on the "new" valves and fixed it at no charge. So I'm thinking of having him do some valve venting. He is plenty smart enough to not take it on if he doesn't think he can do it right. Is it just drilling holes in the right place and that's that? Horn players don't vent valves that I know of.


User avatar
Casca Grossa
Posts: 338
Joined: Thu Aug 13, 2020 11:06 am
Location: Reading, PA, United States
Has thanked: 251 times
Been thanked: 160 times

Re: venting valves

Post by Casca Grossa »

I use an excellent brass repair guy. He is incredibly skilled but has never vented valves before. He told me that he would feel better if I didn't ask him to do it.
Mirafone 184 CC
Blokepiece Imperial
Soon to be 5 valve Lignatone/Amati Eb
Blokepiece Solo
User avatar
matt g
Posts: 2583
Joined: Thu Aug 13, 2020 10:37 am
Location: Southeastern New England
Has thanked: 263 times
Been thanked: 555 times

Re: venting valves

Post by matt g »

Rotors are a pretty simple operation provided the right tools.

Pistons aren’t much harder, but they take a few more minutes of thought to make sure you’re drilling the right spot on the piston.
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
User avatar
iiipopes
Posts: 1060
Joined: Thu Aug 13, 2020 4:26 pm
Has thanked: 138 times
Been thanked: 189 times

Re: venting valves

Post by iiipopes »

Um, have to ask: do you hear a noticeable "pop" from one or more valves as you play? Especially if you are playing legato or other slurred passages?
Jupiter JTU1110 - K&G 3F
"Real" Conn 36K - JK 4B Classic
User avatar
Mary Ann
Posts: 3045
Joined: Thu Aug 13, 2020 9:24 am
Has thanked: 522 times
Been thanked: 598 times

Re: venting valves

Post by Mary Ann »

Nope. I don't think I hear anything at all from the valves when I play; the sound from the tuba is pretty loud. Both the NStar and my old 184 had vented valves, and slurring on them was easier. I don't know if that had to do with the vented valves or not. I'm still not giving this the air it needs some of the time. Polka stuff, no problem, but that's not slurring, most of it. Could be the opposite problem, leaky valves, and I hadn't considered that. We don't have an "official" brass repair person here at all; you'd think we would in a city this size.
User avatar
bloke
Mid South Music
Posts: 19414
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3872 times
Been thanked: 4138 times

Re: venting valves

Post by bloke »

I can send you some pictures and words, if you send me an email reminding me of what your email address is.
Post Reply