pricing question on used tuba PARTS

Projects, repair topics, and Frankentubas
Post Reply
User avatar
arpthark
Posts: 3923
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 956 times
Been thanked: 1074 times
Contact:

pricing question on used tuba PARTS

Post by arpthark »

What do you estimate would be a fair price for a 4 piston cluster, including slides and everything, from an old King 1241/2341? Assume good condition, typical lacquer wear, decent valves, Frankentuba-worthy.

I am just looking for a starting point. Feel free to PM me if you would rather do that.

Thanks!


User avatar
Rick Denney
Resident Genius
Posts: 1032
Joined: Thu Aug 13, 2020 8:24 am
Has thanked: 57 times
Been thanked: 335 times

Re: pricing question on used tuba PARTS

Post by Rick Denney »

I asked this of Matt Walters once, and his response was that he was always on the lookout for those deals, and keeps them for projects rather than selling them. So if you want a valve cluster like that, you'll be competing with pros.

But check and see if Eastman will sell only the valve cluster for their 2341 clone.

Rick "expecting it to be into the low four figures if in directly usable condition" Denney
These users thanked the author Rick Denney for the post (total 2):
arpthark (Fri Jan 06, 2023 10:05 am) • the elephant (Fri Jan 06, 2023 12:09 pm)
User avatar
bort2.0
Posts: 5255
Joined: Thu Aug 13, 2020 9:13 am
Location: Minneapolis
Has thanked: 336 times
Been thanked: 999 times

Re: pricing question on used tuba PARTS

Post by bort2.0 »

The problem is, those tubas are built like tanks and can take a lot of use and abuse and repairs before they end up being sold for parts. So even though it seems like a simple request for a valve block, it's also about it coming from a tuba that is getting parted out.

Another option, instead of waiting for something that's already getting parted-out is to just buy a functioning 2341/1241 and then harvest the parts you need yourself.

For example, here's one on eBay... the upright bell will command a premium, but that also gives you something valuable to sell and recover part of the costs.

https://www.ebay.com/itm/125694537013
User avatar
arpthark
Posts: 3923
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 956 times
Been thanked: 1074 times
Contact:

Re: pricing question on used tuba PARTS

Post by arpthark »

bort2.0 wrote: Fri Jan 06, 2023 11:15 am The problem is, those tubas are built like tanks and can take a lot of use and abuse and repairs before they end up being sold for parts. So even though it seems like a simple request for a valve block, it's also about it coming from a tuba that is getting parted out.

Another option, instead of waiting for something that's already getting parted-out is to just buy a functioning 2341/1241 and then harvest the parts you need yourself.

For example, here's one on eBay... the upright bell will command a premium, but that also gives you something valuable to sell and recover part of the costs.

https://www.ebay.com/itm/125694537013
Thanks, all good points.
Post Reply