Tiny Boosey Eb

For posting interesting and remarkable deals found on the internet.
Post Reply
TheHatTuba
Posts: 122
Joined: Sat Aug 26, 2023 5:44 pm
Has thanked: 12 times
Been thanked: 28 times

Tiny Boosey Eb

Post by TheHatTuba »

12.5" bell :bugeyes:

Image
Last edited by TheHatTuba on Mon Oct 09, 2023 2:09 pm, edited 1 time in total.


User avatar
arpthark
Posts: 3936
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 960 times
Been thanked: 1083 times
Contact:

Re: Tiny Boosey Eb

Post by arpthark »

Your link wasn't working for some reason so lemme try:

https://www.facebook.com/groups/1130819 ... 343074824/
These users thanked the author arpthark for the post:
TheHatTuba (Mon Oct 09, 2023 2:09 pm)
User avatar
arpthark
Posts: 3936
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 960 times
Been thanked: 1083 times
Contact:

Re: Tiny Boosey Eb

Post by arpthark »

That guy always has interesting stuff for sale on the other side of the pond. It's funny how the Boosey design barely changed for almost 100 years. I'd be interested to know if that bell really is 12.5" though.
Dents Be Gone!
Posts: 596
Joined: Thu Apr 06, 2023 5:13 am
Has thanked: 166 times
Been thanked: 147 times

.

Post by Dents Be Gone! »

I agree, guys. This is the way to go.
Last edited by Dents Be Gone! on Wed May 01, 2024 9:24 am, edited 1 time in total.
These users thanked the author Dents Be Gone! for the post:
iiipopes (Mon Oct 09, 2023 2:20 pm)
York-aholic
Posts: 1436
Joined: Thu Aug 13, 2020 10:39 pm
Location: SoCal
Has thanked: 1566 times
Been thanked: 468 times

Re: Tiny Boosey Eb

Post by York-aholic »

Check out the bends in the main tuning slide to clear the bottom bow! Crazy. Cool but crazy.
Some old Yorks, Martins, and perhaps a King rotary valved CC
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4118 times

Re: Tiny Boosey Eb

Post by bloke »

That main slide may be a high pitch to low pitch conversion.
2nd tenor
Posts: 486
Joined: Sun May 09, 2021 1:50 pm
Has thanked: 115 times
Been thanked: 130 times

Re: Tiny Boosey Eb

Post by 2nd tenor »

bloke wrote: Tue Oct 10, 2023 9:52 pm That main slide may be a high pitch to low pitch conversion.
Yes, that’s quite a commonly seen conversion. If the slide had a straight extension then there would be a foul between it and the bottom bow. All of the tuning slides should have spacers added on them too (to lower pitch) and it looks like that lengthening has been done.
User avatar
bloke
Mid South Music
Posts: 19369
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3858 times
Been thanked: 4118 times

Re: Tiny Boosey Eb

Post by bloke »

Were those tiny cheap (c. 1980s) student Boosey and Hawkes 3-valve E-flat tubas (towards the very end of Edgware Road production) built to approximately the same dimensions?

...The B Flats were barely larger. I just repaired two of them that were completely smashed up (horrible/nightmarish), and the band director picked them up about ten minutes ago. As a tribute to Jakob Winter cases, neither one of those (probably) 45-year-old cases have any cracks in the plastic, and only one latch could not be repaired.
2nd tenor
Posts: 486
Joined: Sun May 09, 2021 1:50 pm
Has thanked: 115 times
Been thanked: 130 times

Re: Tiny Boosey Eb

Post by 2nd tenor »

bloke wrote: Wed Oct 11, 2023 10:36 am Were those tiny cheap (c. 1980s) student Boosey and Hawkes 3-valve E-flat tubas (towards the very end of Edgware Road production) built to approximately the same dimensions?

...The B Flats were barely larger. I just repaired two of them that were completely smashed up (horrible/nightmarish), and the band director picked them up about ten minutes ago. As a tribute to Jakob Winter cases, neither one of those (probably) 45-year-old cases have any cracks in the plastic, and only one latch could not be repaired.
Very similar I’d say, mine is locked away at the moment - solely using my Sovereign instead. IIRC my small Eb has a 13” bell, out of which I can push a lot of sound, and is very light to handle.

Someone might grab a picture from this listing on eBay.uk, mine’s the same model.
https://www.ebay.co.uk/itm/126053229599 ... SwcyBlHnL1
These users thanked the author 2nd tenor for the post:
bloke (Wed Oct 11, 2023 2:57 pm)
Post Reply