bead blasting a tuba (Who has done this?)

Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
Post Reply
User avatar
bloke
Mid South Music
Posts: 19337
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3854 times
Been thanked: 4103 times

bead blasting a tuba (Who has done this?)

Post by bloke »

ok...no one...??

PERFECT !!! So EVERYONE is an expert, and I'll get some AMAZING advice. :smilie8:

I've found that I must do this myself...and I DO have the equipment...

It seems to me that - SINCE I WILL be doing it myself, I have the option (LUXURY) of doing it in this manner:

- Of course, I WILL mount the valvesets to the tuba bodies, but only "tack" them in place.

- I will then REMOVE the valvesets from the bodies, bead blast the valvesets and bodies SEPARATELY (so it will be easier to see/reach all the nooks and crannies).

- Finally, I will do the full mounting jobs, and touch up the instruments at the their solder joints...and sure, I will also make certain that I've completely neutralized the instruments (of acid residue) prior to the final passes back inside the bead blasting cabinet...

...eh...??
These users thanked the author bloke for the post:
rodgeman (Mon Sep 06, 2021 11:14 am)


Top
York-aholic
Posts: 1432
Joined: Thu Aug 13, 2020 10:39 pm
Location: SoCal
Has thanked: 1556 times
Been thanked: 467 times

Re: bead blasting a tuba (Who has done this?)

Post by York-aholic »

I for one would love to see a few pictures along the way...

:cheers:
These users thanked the author York-aholic for the post:
rodgeman (Mon Sep 06, 2021 11:14 am)
Some old Yorks, Martins, and perhaps a King rotary valved CC
Top
Tubaryan12
Posts: 49
Joined: Mon Aug 17, 2020 9:03 pm
Has thanked: 0
Been thanked: 8 times

Re: bead blasting a tuba (Who has done this?)

Post by Tubaryan12 »

York-aholic wrote: ↑Mon Sep 06, 2021 12:47 am I for one would love to see a few pictures along the way...

:cheers:
+1
If time and money were no object, I would have my tuba overhauled, bead blasted and lacquer coated. My favorite finish on a brass instrument.
Last edited by Tubaryan12 on Mon Sep 06, 2021 11:45 am, edited 1 time in total.
These users thanked the author Tubaryan12 for the post:
rodgeman (Mon Sep 06, 2021 11:14 am)
Top
User avatar
bloke
Mid South Music
Posts: 19337
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3854 times
Been thanked: 4103 times

Re: bead blasting a tuba (Who has done this?)

Post by bloke »

I appreciate the positive comments. If anyone knows why I shouldn’t blast the body and valve section separately, I would like to hear from them.
Top
User avatar
matt g
Posts: 2580
Joined: Thu Aug 13, 2020 10:37 am
Location: Southeastern New England
Has thanked: 263 times
Been thanked: 555 times

Re: bead blasting a tuba (Who has done this?)

Post by matt g »

I’d be more curious as to why one would want to media blast parts closer to the end stage of assembly, other than maybe just texture consistency?

Seems like you’d want the body and valves separate so that you can hit all of the nooks and crannies in the body and valves with much more ease. Specifically on smaller/more compact horns where getting into those bends may be difficult. But yet the eye can see them easily.

For the finish coat, sure, it should be a whole piece.
These users thanked the author matt g for the post:
York-aholic (Mon Sep 06, 2021 8:31 am)
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
Top
User avatar
Three Valves
Posts: 4608
Joined: Thu Aug 13, 2020 4:07 pm
Location: The Land of Pleasant Living
Has thanked: 815 times
Been thanked: 501 times

Re: bead blasting a tuba (Who has done this?)

Post by Three Valves »

@Tubaryan12 I would keep inside the bell shiny, you??
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Top
User avatar
bloke
Mid South Music
Posts: 19337
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3854 times
Been thanked: 4103 times

Re: bead blasting a tuba (Who has done this?)

Post by bloke »

Sidestepping to the sidebar, “esoterics”, some will remember that I combined a brushed finish with a satin finish on a 186…the 186 that appears in Bill’s videos.

The only bright silver surfaces were the bell interior and the front fixed bearings of the five rotors.

My 1960s Holton B-flat – the short profile one - sports some pretty deep gouges on the bell interior - gouges which run in the direction of the bell. If I do the satin thing on that instrument, I might consider the same combination of finishes as with the 186, but go farther and do a brushed finish on the bell interior - with the sanding lines running the direction of the bell - to cloak those gouges. The challenge would obviously be to get those sanding strokes arrow straight from down inside the bell to the rim of the bell.

yet another option for bell interior decor:
Image
Image
Image
Last edited by bloke on Mon Sep 06, 2021 12:18 pm, edited 1 time in total.
Top
Tubaryan12
Posts: 49
Joined: Mon Aug 17, 2020 9:03 pm
Has thanked: 0
Been thanked: 8 times

Re: bead blasting a tuba (Who has done this?)

Post by Tubaryan12 »

Three Valves wrote: ↑Mon Sep 06, 2021 8:29 am @Tubaryan12 I would keep inside the bell shiny, you??
Yes, without question.
These users thanked the author Tubaryan12 for the post:
Three Valves (Mon Sep 06, 2021 3:34 pm)
Top
User avatar
Three Valves
Posts: 4608
Joined: Thu Aug 13, 2020 4:07 pm
Location: The Land of Pleasant Living
Has thanked: 815 times
Been thanked: 501 times

Re: bead blasting a tuba (Who has done this?)

Post by Three Valves »

@bloke If it were an exclusive tradition/Polka band, yes. :thumbsup:

I have never seen the Easter egg version before… :drool:
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Top
User avatar
bloke
Mid South Music
Posts: 19337
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3854 times
Been thanked: 4103 times

Re: bead blasting a tuba (Who has done this?)

Post by bloke »

I have no idea who could/would do this for me.
I realize that I am attracted to nice-looking things that tend to be nearly unique.
To me, “nice-looking“ is not defined by “a front-action compensating E-flat tuba sprayed with three colors of translucent lacquer which blend into each other”.
Three Valves wrote: ↑Mon Sep 06, 2021 3:36 pm @bloke If it were an exclusive tradition/Polka band, yes. :thumbsup:

I have never seen the Easter egg version before… :drool:
Top
Tubaryan12
Posts: 49
Joined: Mon Aug 17, 2020 9:03 pm
Has thanked: 0
Been thanked: 8 times

Re: bead blasting a tuba (Who has done this?)

Post by Tubaryan12 »

bloke wrote: ↑Mon Sep 06, 2021 8:34 am
yet another option for bell interior decor:
Image
:thumbsup:
Top
User avatar
LargeTuba
Posts: 777
Joined: Thu Aug 13, 2020 11:08 am
Has thanked: 97 times
Been thanked: 136 times

Re: bead blasting a tuba (Who has done this?)

Post by LargeTuba »

bloke wrote: ↑Mon Sep 06, 2021 3:51 pm a front-action compensating E-flat tuba sprayed with three colors of translucent lacquer which blend into each other
Image

A rainbow Holton 6/4 would be pretty sweet.
Pt-6P, Holton 345 CC, 45slp
Top
User avatar
bloke
Mid South Music
Posts: 19337
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3854 times
Been thanked: 4103 times

Re: bead blasting a tuba (Who has done this?)

Post by bloke »

LargeTuba wrote: ↑Mon Sep 06, 2021 7:02 pm A rainbow Holton 6/4 would be pretty sweet.
...for someone else, perhaps...
Top
York-aholic
Posts: 1432
Joined: Thu Aug 13, 2020 10:39 pm
Location: SoCal
Has thanked: 1556 times
Been thanked: 467 times

Re: bead blasting a tuba (Who has done this?)

Post by York-aholic »

This is in the National Shrine to Music Museum. All tarnish I think. 6/4 too, as was asked for two posts above. :laugh:
27228F06-147B-4F2F-8D87-E85B2F269CD2.jpeg
27228F06-147B-4F2F-8D87-E85B2F269CD2.jpeg (18.93 KiB) Viewed 739 times
These users thanked the author York-aholic for the post:
LargeTuba (Mon Sep 06, 2021 7:45 pm)
Some old Yorks, Martins, and perhaps a King rotary valved CC
Top
User avatar
Three Valves
Posts: 4608
Joined: Thu Aug 13, 2020 4:07 pm
Location: The Land of Pleasant Living
Has thanked: 815 times
Been thanked: 501 times

Re: bead blasting a tuba (Who has done this?)

Post by Three Valves »

bloke wrote: ↑Mon Sep 06, 2021 7:13 pm
LargeTuba wrote: ↑Mon Sep 06, 2021 7:02 pm A rainbow Holton 6/4 would be pretty sweet.
...for someone else, perhaps...
Says the man with a bass boat colored sousaphone... :red:
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Top
User avatar
Three Valves
Posts: 4608
Joined: Thu Aug 13, 2020 4:07 pm
Location: The Land of Pleasant Living
Has thanked: 815 times
Been thanked: 501 times

Re: bead blasting a tuba (Who has done this?)

Post by Three Valves »

bloke wrote: ↑Mon Sep 06, 2021 3:51 pm
To me, “nice-looking“ is not defined by “a front-action compensating E-flat tuba sprayed with three colors of translucent lacquer which blend into each other”.
:thumbsup:
Thought Criminal
Mack Brass Artiste
TU422L with TU25
1964 Conn 36k with CB Arnold Jacobs
Accent (By B&S) 952R with Bach12
The Fourth Estate is the Fifth Column
Top
User avatar
bloke
Mid South Music
Posts: 19337
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3854 times
Been thanked: 4103 times

Re: bead blasting a tuba (Who has done this?)

Post by bloke »

Touché, but that instrument was put together to use in a New Orleans style outdoor brass band.
The finish was selected specifically to draw attention to myself.
In a symphony orchestra, the big shiny instrument already accomplishes that, even though I would prefer that it not, being that - the vast majority of the time, other groups or individuals in the ensemble are the stars/soloists/main events.
For the very same types of reasons, I load up my symphonically-utilized tubas with water keys (to avoid twirling them around, pulling big components off of them, and making clanking noises).
Three Valves wrote: ↑Tue Sep 07, 2021 7:39 am
bloke wrote: ↑Mon Sep 06, 2021 7:13 pm
LargeTuba wrote: ↑Mon Sep 06, 2021 7:02 pm A rainbow Holton 6/4 would be pretty sweet.
...for someone else, perhaps...
Says the man with a bass boat colored sousaphone... :red:
These users thanked the author bloke for the post:
Three Valves (Tue Sep 07, 2021 10:17 am)
Top
Post Reply

Return to “Music Chatter”