Show me your cimbasso stand

[Yorkboy]

.

[Three Valves]

Is that BBb??

You can build that but not a stand??

[Mithosphere]

Is that BBb??

You can build that but not a stand??

Yea, come on @Yorkboy, you can't leave us hanging with this horn porn!

[Yorkboy]

Is that BBb??

You can build that but not a stand??

It’s in E flat

I think building a stand might be harder than building the horn

[York-aholic]

Looks great. Any chance you can fill us in on how it plays?

[bloke]

Mine is a previous K&M version of their bassoon/bass clarinet stand. Over the last couple of decades, they have altered their design. I don’t believe I would choose their current version for my instrument.
My stand check several boxes:
- secure
- stable
- collapsible
- loose fitting for a quick grab
I also understand that most of these instruments feature one floor peg. I have two, and my instrument does not rotate off to the right/clockwise when I depress the valve levers.

[Yorkboy]

.

[Yorkboy]

Mine is a previous K&M version of their bassoon/bass clarinet stand. Over the last couple of decades, they have altered their design. I don’t believe I would choose their current version for my instrument.
My stand check several boxes:
- secure
- stable
- collapsible
- loose fitting for a quick grab
I also understand that most of these instruments feature one floor peg. I have two, and my instrument does not rotate off to the right/clockwise when I depress the valve levers.

So are you saying the new K&M is a no-go? They also sell a double-bassoon stand…..

[bloke]

It depends on how it fits a particular instrument.
They way you've made the mouthpipe brace jut out, the mouthpipe probably won't "nestle" (at least, not so as to make me feel comfortable) in the U-shape of any stands that offer that shape at the top.

Hamilton double bass stands are only about $60, and there might possibly (??) be away to rotate the individual arms around to accommodate an individual design. Otherwise, they could be individually altered and rubber-coated.

Mine is a previous K&M version of their bassoon/bass clarinet stand. Over the last couple of decades, they have altered their design. I don’t believe I would choose their current version for my instrument.
My stand check several boxes:
- secure
- stable
- collapsible
- loose fitting for a quick grab
I also understand that most of these instruments feature one floor peg. I have two, and my instrument does not rotate off to the right/clockwise when I depress the valve levers.

So are you saying the new K&M is a no-go? They also sell a double-bassoon stand…..

[tubamuphone]

I have a couple of Hercules bassoon stands that are fine and work on both my Meinl Weston cimbasso and my franken-basso. That having been said, I've gone to a K&M contrabassoon stand when I take the horns out of the house. It's big but extremely sturdy, highly recommended.

https://www.wwbw.com/KM-Contrabassoon-S ... fcQAvD_BwE

JB

[Yorkboy]

I have a couple of Hercules bassoon stands that are fine and work on both my Meinl Weston cimbasso and my franken-basso. That having been said, I've gone to a K&M contrabassoon stand when I take the horns out of the house. It's big but extremely sturdy, highly recommended.

https://www.wwbw.com/KM-Contrabassoon-S ... fcQAvD_BwE

JB

Great to hear it - when you have the opportunity, can you measure for me the inside space across where the horn rests? Many thanks!

Edit - found it:

1267B921-D6B0-434C-B5BE-89120AE3E4CA.jpeg (59.02 KiB) Viewed 618 times

[Bob Kolada]

Cool! I just stand mine on the floor, it doesn't really look like yours though.
What's the file size limit here? I screenshotted my picture and re sized it but it's still too large.