"The Elk" Tuba new info

Tubas, euphoniums, mouthpieces, and anything music-related.
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
User avatar
bloke
Mid South Music
Posts: 19298
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3845 times
Been thanked: 4090 times

Re: Elkhart Tuba

Post by bloke »

If you have ever played one of those student model Miraphone 186 tubas, you know what the difference is: it's not much, but it's a little bit of something.

I love the Elkhart engraving with the elk, and I love the Grand Rapids USA line Engraving that I've seen on the cheap 19-in tuba bells. It's almost as if they are jealous of the top line, and are trying to show off for the other instruments in the factory that cost more.

Somebody could say that Pan American instruments had raw nickel silver pistons and Conn instruments had nickel plated pistons, but really old Conn also had raw nickel silver pistons.

Just as with all other merchandise, the most important thing is that economy models of so many things offer a lower price point, so a corporation or company can still make a profit off of those who have less money to spend.

We have all seen Chevrolet, Oldsmobile, Buick, and Cadillac versions of basically the same cars over the years... and the Cadillac might have a fancier engine, but it may or may not be a better engine or a more reliable engine.
Last edited by bloke on Sun Dec 03, 2023 11:07 pm, edited 2 times in total.
These users thanked the author bloke for the post:
Tim Jackson (Sun Dec 03, 2023 9:57 pm)


York-aholic
Posts: 1432
Joined: Thu Aug 13, 2020 10:39 pm
Location: SoCal
Has thanked: 1554 times
Been thanked: 467 times

Re: Elkhart Tuba

Post by York-aholic »

On Grand Rapids - USA Line - York:

One of the lower priced lines (can't remember which, had no pearls on the finger buttons). Those two budget lines typically had the main slide in the leadpipe, but not always.

I had a York model 33 (20" bell 4/4 BBb) and the GRBICo equivalent (Slide in the leadpipe) for a while concurrently. Because of where the main slide was, the small tubing was different. The valve casings looked the same. The bugle taper looked the same, although ferrules were in slightly different spots (ie the joints between adjoining tubing might be higher up or lower down on one horn than the other). Both horns sounded the same and had similar intonation.
Some old Yorks, Martins, and perhaps a King rotary valved CC
User avatar
bloke
Mid South Music
Posts: 19298
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3845 times
Been thanked: 4090 times

Re: Elkhart Tuba

Post by bloke »

I LOVE that detail-engraved EAGLE on the USA Line tubas !\

also: ' tickled that I could find an example of it on the web...

Image
User avatar
Stryk
Posts: 471
Joined: Thu Aug 13, 2020 8:51 am
Has thanked: 131 times
Been thanked: 89 times

Re: Elkhart Tuba

Post by Stryk »

Elkhart Band Instrument Company was a musical instrument manufacturer in Elkhart, Indiana.
History

The company was founded in 1923 by Andrew Hubble Beardsley (b. Dayton Ohio 25 September 1864; d. New York NY 10 October 1936), who was the president of Buescher Band Instrument Company, and Carl Dimond Greenleaf (b. Wauseon, Ohio 27 July 1876; d. Elkhart 10 July 1959), president of C.G. Conn, and who served the new company as secretary-treasurer. The company produced "Elkhart" branded band instruments as well instruments to be sold under merchandisers' brands ("stencil" instruments). Instruments produced by the company had an irregular assortment of features borrowed from the products of Conn and Buescher, partners in the consortium.

In 1927 the company merged with Buescher (some maintain that Buescher was purchased by Elkhart Band Instrument Company). When Beardsley died in 1936, the company was dissolved and Buescher used the Elkhart trademark for student line instruments until 1959.
These users thanked the author Stryk for the post (total 3):
Dents Be Gone! (Fri Dec 01, 2023 7:55 am) • Tim Jackson (Sun Dec 03, 2023 9:57 pm) • Ace (Mon Dec 04, 2023 12:57 am)
Terry Stryker
Mirafone 186C, 186BBb, 184C, 186C clone
Gebr. Alexander New 163C, Vintage 163C, Vintage 163BBb
Amati 481C
Lyon & Healy 6/4
Kane Stealth tuba
A plethora of others....
User avatar
arpthark
Posts: 3909
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 954 times
Been thanked: 1070 times
Contact:

Re: Elkhart Tuba

Post by arpthark »

bloke wrote: Thu Nov 30, 2023 6:04 pm I LOVE that detail-engraved EAGLE on the USA Line tubas !\

also: ' tickled that I could find an example of it on the web...

Image
sidebar: I may be picking up one of these exact models (in a bit rougher shape) next week. And yes, before you say it, more bottom feeding on my part. :laugh:
User avatar
bloke
Mid South Music
Posts: 19298
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3845 times
Been thanked: 4090 times

Re: Elkhart Tuba

Post by bloke »

I suspect a bunch of people would vote for that eagle and that shield over that York engraving pattern.
Dents Be Gone!
Posts: 596
Joined: Thu Apr 06, 2023 5:13 am
Has thanked: 166 times
Been thanked: 147 times

.

Post by Dents Be Gone! »

I agree, guys. This is the way to go.
Last edited by Dents Be Gone! on Wed May 01, 2024 10:55 am, edited 1 time in total.
User avatar
arpthark
Posts: 3909
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 954 times
Been thanked: 1070 times
Contact:

Re: Elkhart Tuba

Post by arpthark »

Detail of the horn I am considering:

Image
These users thanked the author arpthark for the post (total 2):
Dents Be Gone! (Fri Dec 01, 2023 8:40 am) • bloke (Fri Dec 01, 2023 10:07 am)
User avatar
bloke
Mid South Music
Posts: 19298
Joined: Thu Aug 13, 2020 8:55 am
Location: western Tennessee - near Memphis
Has thanked: 3845 times
Been thanked: 4090 times

Re: Elkhart Tuba

Post by bloke »

Engraved after it was plated. :smilie8:
Dents Be Gone!
Posts: 596
Joined: Thu Apr 06, 2023 5:13 am
Has thanked: 166 times
Been thanked: 147 times

.

Post by Dents Be Gone! »

I agree, guys. This is the way to go.
Last edited by Dents Be Gone! on Wed May 01, 2024 10:58 am, edited 1 time in total.
User avatar
arpthark
Posts: 3909
Joined: Mon Aug 24, 2020 4:25 pm
Location: Southeastern Connecticut
Has thanked: 954 times
Been thanked: 1070 times
Contact:

Re: Elkhart Tuba

Post by arpthark »

Decided to pass on this one.

Sorry to hijack the Elkhart thread with junk from Grand Rapids.

More to the point, student line horns are pretty interesting, especially when they're not just a "no frills" student model a la the Miraphones sold by Tuba Exchange back in the day, but instead unique models like "junior" sousaphones and these BueschConn hybrid things.
Tim Jackson
Posts: 214
Joined: Thu Sep 17, 2020 9:16 pm
Has thanked: 13 times
Been thanked: 128 times

Re: "The Elk" Tuba new info

Post by Tim Jackson »

Yep... BBb with 22" bell. 36" tall, gold wash bell. So many similar Buescher parts.
New pictures on the original post. I can't believe I bought another tuba. Wish I could find an Elkhart Band Instrument catalog.

Tj
These users thanked the author Tim Jackson for the post (total 3):
arpthark (Sun Dec 03, 2023 8:50 pm) • Dents Be Gone! (Mon Dec 04, 2023 3:55 am) • York-aholic (Mon Dec 04, 2023 6:22 am)
Post Reply