Things were going along great with this ca. 1929 Conn 32K I picked up recently... soldered some water keys back on, fabricated a patch for a pinhole in the third valve tubing, soldered a valve stem back on, PB Blasted the slides, and with penetrant and heat, managed to free up all but #2 (ancient lime-stuck, barn find tuba).
So, I let the #2 circuit soak in penetrant overnight and came back the next day and try to free it. The old brass ended up snapping clean and left one leg of the #2 slide inside the female slide tube, flush with the opening.
I'm gonna have to take this thing apart to get to that broken-off slide, aren't I?
tuning slide leg broke inside outer tube
-
arpthark
- Posts: 3899
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 951 times
- Been thanked: 1067 times
- Contact:
-
bloke
- Mid South Music
- Posts: 19281
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3839 times
- Been thanked: 4085 times
