venting valves
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
- Mary Ann
- Posts: 3045
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 522 times
- Been thanked: 598 times
venting valves
How does one vent valves? Can a competent repair person do it? We have a local garage-type repair guy (tuba player) who will not ruin anything, which from me is a pretty high recommendation for someone who isn't in the full-time business of repair. He put the Joy key on my NStar without messing it up (previous owner had removed the spit valve.) He also fixed a sticky rotor in a French horn whose owner had actually sent the valves to be rebuilt by a well-known custom maker who did NOT fix the problem (for $1200) and the local guy found a burr on the "new" valves and fixed it at no charge. So I'm thinking of having him do some valve venting. He is plenty smart enough to not take it on if he doesn't think he can do it right. Is it just drilling holes in the right place and that's that? Horn players don't vent valves that I know of.
- Casca Grossa
- Posts: 338
- Joined: Thu Aug 13, 2020 11:06 am
- Location: Reading, PA, United States
- Has thanked: 251 times
- Been thanked: 160 times
Re: venting valves
I use an excellent brass repair guy. He is incredibly skilled but has never vented valves before. He told me that he would feel better if I didn't ask him to do it.
Mirafone 184 CC
Blokepiece Imperial
Soon to be 5 valve Lignatone/Amati Eb
Blokepiece Solo
Blokepiece Imperial
Soon to be 5 valve Lignatone/Amati Eb
Blokepiece Solo
- matt g
- Posts: 2583
- Joined: Thu Aug 13, 2020 10:37 am
- Location: Southeastern New England
- Has thanked: 263 times
- Been thanked: 555 times
Re: venting valves
Rotors are a pretty simple operation provided the right tools.
Pistons aren’t much harder, but they take a few more minutes of thought to make sure you’re drilling the right spot on the piston.
Pistons aren’t much harder, but they take a few more minutes of thought to make sure you’re drilling the right spot on the piston.
Dillon/Walters CC (sold)
Meinl-Weston 2165 (sold)
Meinl-Weston 2165 (sold)
- iiipopes
- Posts: 1060
- Joined: Thu Aug 13, 2020 4:26 pm
- Has thanked: 138 times
- Been thanked: 189 times
Re: venting valves
Um, have to ask: do you hear a noticeable "pop" from one or more valves as you play? Especially if you are playing legato or other slurred passages?
Jupiter JTU1110 - K&G 3F
"Real" Conn 36K - JK 4B Classic
"Real" Conn 36K - JK 4B Classic
- Mary Ann
- Posts: 3045
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 522 times
- Been thanked: 598 times
Re: venting valves
Nope. I don't think I hear anything at all from the valves when I play; the sound from the tuba is pretty loud. Both the NStar and my old 184 had vented valves, and slurring on them was easier. I don't know if that had to do with the vented valves or not. I'm still not giving this the air it needs some of the time. Polka stuff, no problem, but that's not slurring, most of it. Could be the opposite problem, leaky valves, and I hadn't considered that. We don't have an "official" brass repair person here at all; you'd think we would in a city this size.
- bloke
- Mid South Music
- Posts: 19414
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3872 times
- Been thanked: 4138 times
Re: venting valves
I can send you some pictures and words, if you send me an email reminding me of what your email address is.