Yamaclone F arrived!
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
- bloke
- Mid South Music
- Posts: 19369
- Joined: Thu Aug 13, 2020 8:55 am
- Location: western Tennessee - near Memphis
- Has thanked: 3858 times
- Been thanked: 4118 times
Re: Yamaclone F arrived!
I would assume that there are a ton of people who would purchase a 621f before they would purchase a knockoff.
That having been said, I've watched quite a few people over the years sell their 621f tubas and buy fancier ones that weren't nearly as good.
I could own and play a 621. I'm not saying I'd be enthusiastic about it, but I could. There are other F tubas that I absolutely could not own and use.
That having been said, I've watched quite a few people over the years sell their 621f tubas and buy fancier ones that weren't nearly as good.
I could own and play a 621. I'm not saying I'd be enthusiastic about it, but I could. There are other F tubas that I absolutely could not own and use.
Re: Yamaclone F arrived!
Mine always sounds better in recordings than it does to my ear while playing. Fwiw
Yamaha 621 w/16’’ bell w/Laskey 32h
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
- Rick Denney
- Resident Genius
- Posts: 1032
- Joined: Thu Aug 13, 2020 8:24 am
- Has thanked: 57 times
- Been thanked: 335 times
Re: Yamaclone F arrived!
My experience also.MikeMason wrote:Mine always sounds better in recordings than it does to my ear while playing. Fwiw
Rick “at least back when I had chops” Denney
Re: Yamaclone F arrived!
So, how much was the total cost? Including all fees and shipping?
Yamaha 621 w/16’’ bell w/Laskey 32h
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
- arpthark
- Posts: 3936
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 960 times
- Been thanked: 1083 times
- Contact:
Re: Yamaclone F arrived!
Just slightly over $2,000. I want to say like $2,050 or something.
Blake
Bean Hill Brass
Bean Hill Brass
Re: Yamaclone F arrived!
Wow. We need a comparison with a real one. I’m guessing the real one isn’t 4 times better.
Yamaha 621 w/16’’ bell w/Laskey 32h
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
Eastman 825vg b flat w/ Laskey 32b
F Schmidt (b&s) euphonium-for sale
Pensacola symphony principal tuba
- arpthark
- Posts: 3936
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 960 times
- Been thanked: 1083 times
- Contact:
Re: Yamaclone F arrived!
I'm already impressed with it. Once I get this loose solder joint or whatever is buzzing fixed, it'll be quite the player.
Anybody in the NYC metro/New England area with a real YFB-621 who wants to meet up to A/B compare, just let me know.
Anybody in the NYC metro/New England area with a real YFB-621 who wants to meet up to A/B compare, just let me know.
Blake
Bean Hill Brass
Bean Hill Brass
Re: Yamaclone F arrived!
my tuba has also arrived. I will test and report in more detail. but the first impression is very good. only the lead pipe angle is not yet optimal.
- These users thanked the author djtubat for the post:
- jonesbrass (Wed Apr 26, 2023 4:25 pm)
Yamaclone F arrived!
https://on.soundcloud.com/ViH3G1dvbTwrorzw9
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
- These users thanked the author djtubat for the post (total 4):
- arpthark (Mon May 08, 2023 10:48 am) • Mary Ann (Mon May 08, 2023 11:44 am) • bone-a-phone (Mon May 08, 2023 6:36 pm) • Estubist (Wed May 10, 2023 8:52 am)
- arpthark
- Posts: 3936
- Joined: Mon Aug 24, 2020 4:25 pm
- Location: Southeastern Connecticut
- Has thanked: 960 times
- Been thanked: 1083 times
- Contact:
Re: Yamaclone F arrived!
Fantastic. Sounds great. What is your recording setup?djtubat wrote: ↑Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
Blake
Bean Hill Brass
Bean Hill Brass
Re: Yamaclone F arrived!
my recording setup: rode nt-5 and an old Yamaha standalone recording mixer.arpthark wrote:Fantastic. Sounds great. What is your recording setup?djtubat wrote: ↑Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
Gesendet von iPhone mit Tapatalk
-
- Posts: 110
- Joined: Thu Aug 13, 2020 3:37 pm
- Has thanked: 70 times
- Been thanked: 23 times
Re: Yamaclone F arrived!
So all 4 parts on the F then? Sounds nice!djtubat wrote: ↑Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
Re: Yamaclone F arrived!
4th part is played on c tubaLibraryMark wrote:So all 4 parts on the F then? Sounds nice!djtubat wrote: ↑Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
Gesendet von iPhone mit Tapatalk
- These users thanked the author djtubat for the post:
- LibraryMark (Tue May 09, 2023 3:21 pm)
-
- Posts: 343
- Joined: Fri Aug 14, 2020 7:03 am
- Has thanked: 116 times
- Been thanked: 93 times
Re: Yamaclone F arrived!
How much electronic tweaking was there on the intonation? Would it be possible to hear a raw recording? It has a processed sound because it's just a little too perfect. The sound is impressive, but I know even bad recordings can sound great after all the beats and intonation are lined up. Not a knock on your performance, just want to honestly see what the horn's warts look like. The sound is really remarkable from something so inexpensive.djtubat wrote: ↑Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
Yamaclone F arrived!
I had to correct the rhythm of the last 2-3 bars because otherwise it would have been difficult with the ritardando. there is no processing other than reverb and compressor/limiter on the master channel.bone-a-phone wrote:How much electronic tweaking was there on the intonation? Would it be possible to hear a raw recording? It has a processed sound because it's just a little too perfect. The sound is impressive, but I know even bad recordings can sound great after all the beats and intonation are lined up. Not a knock on your performance, just want to honestly see what the horn's warts look like. The sound is really remarkable from something so inexpensive.djtubat wrote: ↑Mon May 08, 2023 10:22 am https://on.soundcloud.com/ViH3G1dvbTwrorzw9
Yesterday I made a recording with the China Tuba. 1st-3rd Tuba is played with China F tuba, 4th part with my C tuba York style. Intonation is a bit of work, but the sound and playability is ok.
For me, the mouthpipe angle is too low, I will definitely change that.
I'm happy with the instrument though and didn't expect to get such a good tuba, especially for the money.
Have fun listening to the recording.
(Headphones recommended)
I swear to god I didn't correct the intonation!
-
- Posts: 343
- Joined: Fri Aug 14, 2020 7:03 am
- Has thanked: 116 times
- Been thanked: 93 times
- Mary Ann
- Posts: 3038
- Joined: Thu Aug 13, 2020 9:24 am
- Has thanked: 521 times
- Been thanked: 598 times
Re: Yamaclone F arrived!
Curious as to what mpc you apparently already had that fits so well with this. I have a horn-playing friend (also with dystonia) whom I'm trying to talk into getting in to tuba. She is about my size, which might mean the wrist problem is there, but she could afford what you paid and an F tuba is a great place for a horn player to start. I'd want to recommend a mpc that works well, which is why I'm asking. She is very talented and determined and would be able to start on good equipment and just adjust to it.
Re: Yamaclone F arrived!
Mouthpiece is a very individual thing and I don't know if my mouthpiece fits you. I play a custom-made mouthpiece, cup diameter 31.66mm, bore 8.1mm. the cup is relatively deep for an f tuba mouthpiece, the back bore is not extremely large.
for this small f tuba I would prefer a mouthpiece with a deep cup (for a nice dark sound). however, there are certainly mouthpieces that respond more easily in the high register. it depends on the purpose
for this small f tuba I would prefer a mouthpiece with a deep cup (for a nice dark sound). however, there are certainly mouthpieces that respond more easily in the high register. it depends on the purpose